Hey gang,

We're working on a project that's currently designed as mass timber. We're up against some cost control efforts (of course) and the CM/Client is asking about changing some of the building to steel or green steel. We set out with a goal on the project that within the core and shell, Module A GWP emissions will be net zero.... Read more

In a recent e-mail to BuildingGreen subscribers, Paula Melton pointed out that USGBC has opened the call for suggestions for LEED v5.

Every day, I encounter dripping skepticism from building owners about LEED for New Construction, because of the many many times that the fanciful outcomes of energy, water, and daylight models bear little ... Read more

I came across these open roles recently on Gensler's career page. Sharing them here if there is any interest in this group. As I understand it, though the roles listed are in NYC and NJ, they would be OK if the person reported to one of the following offices: NYC, Morristown, Boston or Toronto.

Sustainability Specialist – NJ: https://... Read more

I have to admit that I wasn't particularly paying attention to LEED during Greenbuild, but anyone recall the "big announcement by USGBC" that LEED v4.1 is coming?

Article can be found @ Green Building Law Update by Stuart Kaplow and the title is "LEED v4.1 Announced by USGBC at Greenbuild."

https://www.greenbuildinglawupdate.com/... Read more

test

Has anyone found any options to recycle safety vests, or discovered an upcycling option for them?  We are about to replace all of our vests company-wide and will have thousands that we don't want in the waste stream and we don't want to be reused as safety vests.  Any thoughts or ideas would be great!

Thanks and I hope everyone is... Read more

They say that Louisianans are often late to the party but enjoy catching up.  The state, which had been stuck on ASHRAE 90.1-2007 (commercial) and IECC 2009 (residential) and has just adopted legislation jumping to IECC 2021 / IRC 2021, and commits to automatic upgrades with each 3-year code cycle.  This means we join CA, OR, WA, MA, and VT--... Read more

Dear SLD-ers,

We have a project team considering the use of copper cladding for a high profile project in Vancouver. The preference is to use pure copper that is pre-patinated and does not have additional coatings.

We are attending a CEU from the Copper Development Association to understand options and environmental impact, but we... Read more

If you work on projects in Massachusetts, you are probably working under the updated MA Stretch Energy Code. While this code is doing great things pushing for electrification and very efficient buildings, it can still be tricky to implement or adjust your processes to the calculations even for seasoned pros. AIA MA in conjunction with BE+ has... Read more

Welcome to the quiz portion of Better Steel, Lower Impacts!

Learning Objectives
Upon completing this course, participants will be able to:


Understand the process of how steel is made.

Recount how the U.S. steel industry has been improving its environmental footprint, while improving product performance.

... Read more

The sheer number of building product certifications and labels is overwhelming, and even those experienced with green labels can get exhausted trying to figure out which are relevant and which aren’t.

The confusion in the market over green labels can complicate efforts of both manufacturers and design professionals... Read more

I know that there is a risk of starting a whole flurry of congrats through the forum, but this is a biggie, and deserves some recognition:

Congratulations Andrea and Melanie!! Huzzah!!

And a reminder--If you want to reach out to them privately, rather than through the forum, with your message, you can see anyone's email address by... Read more

My firm recieved an invitation to this event in March. Wondering if anyone has any insight on Metropolis Mag events or if anyone here plans to attend. Looking forward to connecting! 

Hi all, has anyone come across a comprehensive (and recent) study looking at how long buildings actually last (beyond Stewart Brand)? I know of plenty that look at the benefits of reuse, but none that look at existing building stock and how much has been reused vs. demolished. 

As we start looking at embodied carbon metrics, I can't help... Read more

Furnaces heat air that is then distributed through ducting and warm-air registers.

Approved by BuildingGreen

Products approved by BuildingGreen include the highest-efficiency, sealed-combustion furnaces and high-efficiency wood or multi-fuel furnaces. A multi-fuel furnace uses several sources of energy such as wood, wood-pellets,... Read more

I have a client that is very interested in automated shades for a mid-rise multi-family housing project. Do you have any examples of projects that have attempted this? I assume it would involve occupancy sensors and/or an over-rideable default setting dependant on sun position and temperature. I also have an MEP Engineer team that is having a... Read more

I am the Moderator of the 2023 Strategic Council and the call for nominations for the 2024-2026 Strategic Council at-large representatives has just been released.  I would encourage any interested parties to apply for this position.

The Strategic Council’s purpose is to develop ideas to inform future needs and opportunities for the... Read more