Hi everyone - I will be holding my breath and attending the AIA conference in person this June. Is anyone else going? I'd love to reconnect with each of you!

Apologies if I've missed it - with there be a BuildingGreen meetup?

Feel free to email me if you don't want to reply all - kanderson@lmnarchitects.com

-Kjell

I read a very misleading article on the AIA's website today regarding antimicrobials and the benefit of microbicidals in paint. It was written by a manufacturer, not a healthcare professional, and was not obviously labeled as sponsored content on the website. (I received the link in an email, which did label it as such).

https://www.aia.... Read more

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

The Getting to Zero Forum is happening next week in Minneapolis, Minnesota (my home state!). Anyone else from this group planning to attend in person? I'm especially curious as the Forum comes so quickly on the heals of the Living Future Conference.

As a proud Minnesotan, I have a hard time imagining how anyone could ignore an... Read more

I'm passing on an alarming (and truly Orwellian!) message from the AIA that some may have received:

The AIA is aware (and has been actively addressing) that there is a draft executive order circulating for consideration by White House officials that would officially designate “classical” architecture as the preferred style for the... Read more

This page contains our full User Agreement.

This Agreement sets forth the terms and conditions for your use of all webpages under both the BuildingGreen and LEEDuser names and domains, published by BuildingGreen, Inc. (collectively, the “Site”), including The BuildingGreen Report (formerly Environmental Building News) and BuildingGreen... Read more

Hi folks,

I hope you're all doing well, despite the heat (thermal, political, social...ugh!).

We've had low turnout on the SAL monthly calls lately; it seems that these aren't a high priority for many of you. That's not necessarily a problem, if you're finding value in being in the network for other reasons, that's fine.

We... Read more

ASHRAE 209 in all its glory has been uploaded. This will impact our architectural process, for better or worse, so we should embrace it and learn from it. The revised AIA Energy Modeling Design Guide (due out next year) has been timed to correspond roughly to 209 coming out and will include references to it. The first few energy modeling '... Read more

Hi All,

I'm working on a LEED for Schools project under 2009, and received some amorphous comments back about our Mold Prevention Plan. We used the LEEDuser template as a guide, while also referencing the EPA document the credit is based around, but the reviewers feel we haven't provided proper metrics. The EPA plan is something like... Read more

This are opportunities for us to get involved as design and construction allies with the new administration and the US Department of Energy on more efficient building.

The first link below is for low-carbon projects that will provide the case studies and solutions that the industry can follow.  The second is identifying barriers and... Read more

Hi Green Gurus,

We have recently had a beloved member of the HKS DesignGreen team relocate to Toronto due to work visa challenges in the US. Our loss could be your gain if you have an office in Toronto! We are hoping to collect a list of leads for him once the dust settles on his move and he begins his job hunt. If you have any... Read more

Has anyone here had success in comparing life cycle impacts for different window system options? We have been trying to compare different options but have only been able to source one expired EPD for an actual window (frame + glazing). Is the typical approach to separately compare glass and framing options? Are we missing something or is there... Read more

Hello all,

Thank you so much for your work on the Contractor Commitment. In preparation for the Summit, we've pulled all of the sections together into one cohesive document. We would like to invite everyone in the SCL network to review and comment on this latest draft so that we can compile comments before Wednesday and make the most of... Read more

Hey all,

Question for those of you who do in-house daylight analysis about modeling translucent glazing.

We use ClimateStudio for our modeling. It has plenty of material options for clear glazing but nothing for translucent glazing, and we are trying to understand the impacts of a translucent interlayer at some skylights. We can... Read more

Hello, All!

Looking for some quick insight from the braintrust into how to best approach project goal-setting.

We’ve been taking a critical look at goal-setting practices to better understand what drives the gap between projects that meet ambitious high-performance targets and those that don’t. Recognizing that goal setting is a... Read more