Hi all,

We are about to start a affordable housing passive house project in Boston and in a few presentations I've seen great signs that builders use to try to get the point across to subs as to how important air sealing is. Some are even quite funny! The builder we are working with does not have a sign like this, but is open to ideas.... Read more

Hello All,

A group of us (three architects and a builder- sounds like there should be a joke here) were debating this and we  are stumped.

Application: Residential exterior trim.

50 year warrantied composite product of agricultural byproduct with PVC (EPD not published yet) vs 100 year (if primed on all sides and painted or... Read more

I wanted to alert you to this opportunity to help develop a new ASHRAE Standard. They are especially looking for people who have not served with ASHRAE previously (aka the usual suspects)

ASHRAE Standard 242P, Standard Method for Calculation of Building Operational Greenhouse Gas Emissions

1 Purpose: This standard provides a... Read more

Hi all. Not to poach from your awesome firms, but FXCollaborative is hiring a Sustainable Design Specialist. Here is the job posting:

Sustainable Design Specialist - FXCollaborative, Brooklyn, NY, US

Please send any great candidates my way!

Thanks,

Dan

Hello everyone,

Here's a reminder that our next monthly call will be taking place next Tuesday, September 10th at 2:00pm EST.

Please feel free to join us!

Join Zoom Meeting
https://zoom.us/j/661110941
Dial by your location
        +1 929 205 6099 US (New York)
        +1 669 900 6833 US (San Jose)... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Katrina Amaral
Timberdoodle Farm

Jacob Dunn
ZGF

Steve Rigdon
Yakama Forest Products

Jennifer Shakun
New England Forestry... Read more

The Sustainable Community Design Leaders Peer Network brings together planners, architects, landscape architects, and allied leaders who are committed to leveraging the... Read more

Gurus -

I'm looking for (or to build) a set of US district energy projects for developer-led mixed-use/residential neighborhoods/districts.  Does anyone have a resource for this or have started something similar?   

I am not a member of IDEA but utilize their site quite often. Any other resources come to mind?  I'd be happy to... Read more

So our last webinar effort flamed out with the overloaded internet, but we've regrouped and have the session scheduled for this Thursday 4/2 at 1:10.  We pre-recorded the webinar to make sure everything goes smoothly and I have to say that Mike is delivering some pretty fantastic content. It doesn't engage LCA tools, rather focusing on core... Read more

Hi Everyone,

Who has worked on a SITES certification and can share the approximate hours involved for administering and completing documentation? A relative sense of the effort compared to LEED would also be helpful, similar to the thread about WELL on this same subject. 

Appreciate any insight. Thanks! -Hilary

Welcome to the quiz portion of The PVC Debate: A Fresh Look

Learning Objectives
Upon completing this course, participants will be able to:


1. Catalog the history of PVC in the building industry.
2. Recount the connections between PVC and chlorine, dioxins, mercury, and vinyl chloride.
3. Explain the... Read more

Hello, I'm wondering if anyone out in the network has experience with the following:

>Low carbon concete mixes for polished concrete slabs: we're hearing concerns from our concrete supplier that using a low carbon mix design for a polished concrete slab will cause pitting. What experience do others have?

>Low carbon concrete... Read more

Hive mind,

We recently learned that 3M has discontinued the production of their 3M Daylight Redirecting Film (https://www.3m.com/3M/en_US/building-window-solutions-us/solutions/dayli...). This product was selected by an architecture client last year as the optimal daylight/glare control strategy for a school project, and we're assisting... Read more

Hi, all.

Has anyone used Unicel's Timber Curtain Wall System? It uses engineered glulam wood mullions on the inside with aluminum mullion caps / butt joints. Has anyone gotten close to using it, but couldn't get it procured for a particular reason? They note up to 72% more energy efficienct than a conventional aluminum curtain wall and... Read more

I'd love to hear thoughts from the design, consulting, and contracting firms in this group about ways to make our specs more inclusive, or at least less exclusive to minority and women owned contractors and subcontractors and others that have not had the benefit of what a recent "Equity in Specs" presenter termed the "Fathers / Brothers / In-... Read more

Hello. Has anyone tackled "tracking emissions from all company-purchased cloud computing" yet? This is in the best category for CC 2.0 and wanted to ask.

How "deep" did you go? 

This was an interesting read, but still left me a little confused about how far I need to go and even what questions to ask:   

https://medium.com/... Read more

Has anyone had any success with achieving the LEED Building Envelope commissioning points with an alternative compliance path using the requirements of the PHIUS verifier? It seems like an unnecessary duplication to ask the client to pay for a BECx agent and a Passive House verifier. Or am I missing something? I can't find any LEED... Read more