We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

I am diving back into Sefaira for the first time in a while, and the program still seems to be missing the ability to account for automatic daylight dimming in energy savings. Previously I had used an LPD reduction equivalent to emulate the savings automatic dimming would provide. Has anyone done a similar work-around? 

We are excited to open registration for the Sustainable Design Leaders Winter Summit 2020! This year’s Summit will take place Jan. 29th - 31st, 2020 at The Lodge, Gulf Shores, AL. The Summit agenda will be shaped by the collective group feedback given in the upcoming pre-summit survey. The Summit begins Wednesday evening (usually 5pm) with a... Read more

Welcome to the quiz portion of The Chemicals on Our Carpets and Textiles.

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand when and where certain treatments may be superfluous or even pose unnecessary risks.
2. Recognize which applications might necessitate certain... Read more

Hi folks, 

AIA COTE National is looking for Techincal Reviewers for the 2025 awards. Interested, or know someone who might be?  Sign up here: https://form.jotform.com/231175886103153

Thanks!

Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

hi all! I'm almost at the finish line with this year's 2030 reporting...whew. I'm running into an issue that I wanted to throw out to this group, regarding the zero tool and national average baselines. Hoping some of y'all who manage your firm's 2030 data, or are just more familiar with CBECS and related data, have some insight / experience to... Read more

All,

I think there may be more than a few people interested in an article I co-authored titled Comparative whole building life cycle assessment of renovation and new construction. It is now available in the journal Building and Environment. Fortunately we have a link that gets you past the paywall that is good for 50 days. If you have... Read more

Hello SCL, I was asked by a friend at ILFI to share this invite specifically to the SCL group to join their Living Future 20 conference which is in a couple weeks and will be all online.  There is also an invite for a construction-only focused ILFI discussion May 14th in the message as well.  Hope everyone is doing alright out there.  Talk soon... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Why high-performance assemblies? And why now? Today we demand better thermal performance from our building assemblies than ever. But higher performance... Read more

Composite windows come in two basic types: fiberglass, and wood/plastic composite.

BuildingGreen-Approved Windows

Fiberglass and other composite window lines have NFRC unit U-factors of 0.20 or lower. Higher U-factors are allowed for products that include significant recycled content.

Manufacturers also must demonstrate... Read more

Welcome to the quiz portion of Changing Building Design Priorities for a Changing Electrical Grid!

Learning Objectives
Upon completing this course, participants will be able to:


Define a “Highly Variable Renewable Energy” generation asset, or VRE, and understand how VREs can most effectively contribute to the... Read more

Hello SDL!

Has anyone set "Ecosystem Benefits/Service" targets for an individual project or for all their projects? I was previously against the idea of even measuring ecosystem benefits but I've had my mind changed in recent months!

Currently we want to set a target for every project to: "Improve ecosystem benefits on every site... Read more

I am very interested to understand the deployment of LED temp jobsite lighting on a national level.  I think this all goes back to the low emitting jobsite.

1. Does your firm utilize temp jobsite lighting on your projects?  

2. Is this every project or a percentage of projects?

3. In your state or area is it prevalent, one... Read more

I'm just wondering if anyone is using GBCI's Better Materials site as their go-to source for transparency and healthy materials.  Having all the search engines on one platform is great in theory, and I keep hoping that it will be the one-stop site/resource that I can get all our designers to use.  Unless I'm missing something though, it still... Read more

I understand the AIA 2030 team is hoping for as many firms (and projects) to submit some form of LCA data in the new DDx website this week, in order to learn how the industry is tracking embodied carbon.  We have four projects that dabbled with Tally last year, which we'd like to report this week.

Has anyone run into a hurdle where you... Read more