Hi everyone,

Happy new year!

The FIRST First Friday Fika* of 2024 is happening this Friday, January 5th from 11am to 12pm ET, hosted by Candace Pearson.

Here is the registration link for the Fikas, or if you've registered previously, you can use the same link for this week.

We look forward to seeing you Friday!

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Hi, curious if anyone in the group has considered using Fitwel in an existing (built) school project (K-12). 

Would be interested in hearing your experiences and if this tool is a good fit for this type of project.

Hi All,

I wanted to share an exciting opportinity with this esteemed group: Placetailor is seeking out a Mechanical Engineer to add to their growing team. They are located in Boston, MA and focus on Passive House, Low-energy Design, and they have for two years running meet the tenets of the AIA 2030 Commitment! This is an exciting place... Read more

Hi All -

I'm wondering if any of our SDL people have a project case study on designing for deconstruction that they'd like to present on? I know there are a lot of conversations that we should be designing for deconstruction but has anyone done a focused project?  Thank you for any input you might have.

Building Green is the longest continuous running green building publication in the world. Its originator, West River Communications, was founded in 1985 as “a company that would translate technical information on energy efficiency and other environmental topics for the public and building... Read more

Hi, this is a somewhat niche/specific question - we are working on an all-electric school (middle and high school) that includes a chemistry lab. The lab was going to have portable sources for flame experiments, but there is concern that the portable sources would be unsafe for middle school students, so they are asking for a hard-pipe natural... Read more

Hi: I'm writing to share a unique opportunity to make a difference at SCALE as a Sustainability Manager at Amazon Global Services.

This comes from Lisa Matthiessen, FAIA, LEED Fellow who some of you may know. Lisa just joined Amazon's Worldwide Sustainability Team who is charged with making real their Net Zero for all operations by 2040... Read more

Hi everyone,

As you may know the ICC has changed the way the IECC will be written in the future and most of us think that will reduce the stringency of the future energy codes that are the biggest lever in the fight against climate change within the buildings sector.

So one of the best pathways forward is via ASHRAE, which has a... Read more

Lake|Flato developed a project process road map as an internal project management tool over a decade ago, and we're looking into updating it.  It serves as a sort of "checklist" of major design, sustainability, and QA/QC milestones for each project phase.  I know we've talked about similar tools at other firms at past SDL summits, so wanted to... Read more

Does anyone here have a draft spec for low embodied carbon concrete they could share? I see the GSA has a standards sheet with MGWP limits, but we are hoping to actually specify the mix for upcoming projects.

Morning SDL,

Working on a midwest lab and trying to make the case for electrification in a slower greening grid with a reluctant MEP team. Here are a few sources I have checked for case studies:

Hi all,

I had a position listed for a Sustainable Design Coordinator which we have down for the moment as we've taken on a fall intern instead. In the interim, however, I did have a couple of great candidates that I'd like to help find good matches. One of those candidates is Marissa Lantieri, see her resume and portolio attached.