BuildingGreen Report

Forum topic

Related to some recent questions on site-specific sun/wind analysis and early energy modeling tools, are there any tools that account for nearby topography (like bluffs) or large buildings/vegetation in energy calculations? Or favorite methods to estimate its impact particularly during early massing studies?

Thanks,

Rachel

Forum topic

Hi all!

I'm working on my first energy positive / passive house multifamily building and trying to figure out the trash/recycling chute. I am curious what solutions you have employed to make the trash chute air tight? We have excluded the whole chute from the envelope. Do you use airtight doors (and which ones?) at each floor trash/... Read more

Product Guide

Composite windows come in two basic types: fiberglass, and wood/plastic composite.

BuildingGreen-Approved Windows

Fiberglass and other composite window lines have NFRC unit U-factors of 0.20 or lower. Higher U-factors are allowed for products that include significant recycled content.

Manufacturers also must demonstrate... Read more

Forum topic

ASHRAE posted this year's list of honors and right there at the top of the list is our SMEPL colleague, Cindy Cogil - now able to add FASHRAE to her signature block!  Well done, Cindy and congratulations to ASHRAE for recognizing your accomplishments.

Quiz

Welcome to the quiz portion of Better Choices in Low-Slope Roofing.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Explain life-cycle impacts, health and environmental hazards, and durability of low-slope roofing options.
2. Classify situations for which reflective roofing... Read more

Forum topic

Hello Green Gurus,

We are excited to announce that BuildingGreen is planning a series of in-depth virtual facilitation workshops for this fall. We are collaborating with Julie Huffaker from Deeper Funner Change (who you may remember from the 2020 Winter SDL Summit, or her introductions to virtual facilitation back in April). She will... Read more

Quiz

Welcome to the quiz portion of "Spec This, Not That: Avoiding Toxic Chemicals in Commercial Building Projects"!

Learning Objectives
Upon completing this course, participants will be able to:


Identify 33 common hazards found in building products, along with their health and environmental impacts and where they might be found.... Read more

Forum topic

Hello fellow Green Gurus! 

I am very thrilled to share this news. "Global architecture, design and planning firm HLW is pleased to announce BEYOND, a cutting-edge sustainability consultancy working across the built environment to drive higher standards for sustainability, resilience, and building performance."

Please click here to... Read more

Forum topic

Is there a way for southface staff or guest experts to "pin" or "tag" the "right" answer in a forum question? It might be useful to designate the right answer and pin it to the top of a forum thread. I don't want the answer selected via crowd source but by staff or volunteers. Thanks.

Forum topic

Hi All - I have a 3 bdroom close walking distance to Greenbuild venue - but I don't need it.

Last call before I cancel it - if anyone wants it - I can transfer!

Just shoot me an email directly to bb@sustainable-performance.org

Thanks and see you there!

Forum topic

We have a client for whom we are designing a very high performance manufacturing facility, and they want to communicate their building's performance both dynamically and in real-time within their lobby for guests and staff.

We would like to mine the wisdom of this group to see what recommendations we can muster regarding high quality... Read more

Forum topic

Is anyone else working on a project doing Living Building Challenge v4.0 Energy Petal? We're working through the Imperative 08 Net Positive Carbon Resiliency Strategy requirements that ask for the project to be habitable for a week in the event of an emergency. We're curious how others are defining "habitable" and what systems assumptions... Read more

Forum topic

I'm going way outside of my skillset and comfort zone...venturing into HR territory to do an analysis of my company's benefits package to see if it meets exceeds or falls short of the requirements of Fitwel and WELL. Has anyone else done this within their organization? How was this received by your company's executive team?

When... Read more

Forum topic

Greetings, colleagues!

Here's an opportunity for this community from AIA COTE Advocacy: US Congressman Paul Tonko (D-NY), Ranking Member of the Environment Subcommittee of the House Committee on Energy and Commerce, is looking for input from national stakeholder groups to help develop new federal climate legislation. Congressman Tonko... Read more

Forum topic

Hi folks! I had a blast at the Show + Tell Tuesday night of Greenbuild. Thanks to Payette for hosting, and to Arrowstreet for joining Payette and BuildingGreen as sponsors. What a great way to get a "tasting-menu" Greenbuild experience!

I also caught a couple of great sessions on Friday morning. Polling others, it seems that the... Read more

Forum topic

This is specifically to Chris but also to anybody who is interested in the topic - which Chris raised on our SAL call today, regarding how to influence change:

From this article, which i thought was good but had a great paragraph pulled below.

https://www.nytimes.com/2020/02/12/business/Steve-Mollenkopf-Qualcomm-corner-office.html... Read more

Forum topic

Hello all,

We are having a mini office debate on fiberglass vs aluminum windows for use in schools (k-12) in Massachusetts. In the past we have always used aluminum windows on our schools, for durability. However, their performance is not as great as other products that are up and coming on the market. There is some hesitation to switch... Read more

Product Guide

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Wall assemblies are made up of a number of different materials and systems, and installing each of them requires considerable time and labor and can introduce errors that compromise the building’s weather... Read more

Forum topic

My apologies if I posted this question twice ont he forum - I am a newbie on this forum.

Anyone knows how to import an structural emobdied carbon project file into architectural project file of the same proejct to generate a combined Sankey graph?  My Building Transparency/CLF contacts haven't got back to me for a week now...

... Read more