Colleagues

It has been my great pleasure to serve the AIA's COTE Top Ten review process, both as a main juror and, most recently, as one of the technical review team.  I have specifically reviewed the Discovery and Energy measures for the past few years.  I will be serving again on the 2021 team.  The AIA has already received many more... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

We have all these resources out here in the ether but it’s so hard to pull them into one spot! I was asked, last minute to join a client call today to help convince both the client (affordable housing developer) and the mechanical engineers to "stick with" a commitment to 100% electric design that was publicly stated when the competition was... Read more

Posting at the request of Sara Bayer of Magnusson Architecture and Planning, who will soon join this group:

"In our quest to achieve Passive House EUI levels in all of our multifamily projects in a healthy manner, we are encountering pushback on the one item that is not really code min just yet (in NYC) and adds real cost:  ERV’s.  Our... Read more

Hi all,

I'm curious how various firms are approaching their own office projects, re green building certifications. I'm especially interested in medium-large firms that have multiple offices, but policies and processes from small firms may still be instructive.

Do you have a firm-wide policy or is it a case-by-case thing? Has... Read more

I wanted to post a reminder for you all that the Sustainable Design Leaders Summit will be kicking off with a Pre-Summit workshop in Seattle July 31st, 9am - 3pm. If you are interested in joining your peers for this workshop, please see the registration link below. Also, if you know someone in the Seattle area that would be good to have in the... Read more

I'm hoping someone knows the anser to this question. For the LEED ND certification the minimum requirement is "The LEED project should contain at least two habitable buildings and be no larger than 1500 acres." Does habitable mean buildings with dwelling units?

Hi Sages,

As you may have seen in my message, the Peer Networks Member List is not very helpful to us (yet), because a person can only show up in one network. Many of us are also in SDL or other networks; there are many more of us than show up when you filter that list for "Sages."

Until we can get that fixed, we'll share the... Read more

Curious what people's 'best' experiences or recommendations are for load calculations and energy modeling regarding electrochromic glazing... hoping I can lean on others as it's just now becoming more of a talking point in our market here in Omaha. 

Specific questions including whether load and energy modeling software are separate (... Read more

Welcome to the quiz portion of LEED v4 Tips from Early Adopters: Earn High Ratings Without Added Costs.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how the Integrative Process credit rewards good design but is tricky for taxpayer-funded projects.
2. Describe how... Read more

Hello Gurus,

I’m writing to share with you an effort a small group of lighting designers from the Boston area started which is now rolling into a large scale effort.  We’ve put together a Lighting Advocacy Letter to accelerate the sustainability of lighting products. Inspired by the AIA Materials Pledge, the letter is intended to... Read more

Ace Brockwell

I'm pleased to announce that the AIA Board of Directors has unanimously adopted the A&D Materials Pledge as the AIA Materials Pledge!!!!! The support of so many of you was a key factor in making it so easy for the AIA Board to adopt The Pledge. The Materials Pledge now has 90 signatory firms, including many of yours. Thank you all.  Now,... Read more

Our guys have started talking about how the built enviroment can address infection transmission in public spaces - places like lobbies and waiting rooms, particularly in applications where people queue - theaters, airport gates, amusment parks, etc.  In the specific case of Covid-19, we know the microbe can be transmitted three ways:  fomite (... Read more

Lauren Shumaker (Turner Construction) and I are starting a group to focus on improving the submittal process, currently focused specifically on healthy & sustainable materials and the use of the mindful Materials library. The purpose of this working group would be to align project management and LEED project software (ex: Procore, CMiC,... Read more

Thank you for your interest in the Sustainability Leaders Peer Networks hosted by BuildingGreen. We have received your application.

A BuildingGreen team member will be in touch with you soon via email to discuss next steps in the application process.