Welcome to the quiz portion of Choosing Insulation: Health and Environmental Considerations – Unit 1.

Learning Objectives
Upon completing this course, participants will be able to:


1. Discuss how insulation works.
2. Summarize how insulation performance is measured and reported.
3. Recount the wide... Read more

Received answers from below questions from NIST Andy Persily

1. Is there a preferred bookends range of CO2 for both “optimal” energy and human performances?

Andy: No

2.Is the ASHRAE ventilation of 1000-1200 ppm average, probably not based on performance, suggesting current ventilation rate is sub-optimal with cognitive... Read more

Hello All,

Through a regional School of Architecture, our firm has been connected with a very intriguing startup that has been engineering a new rooftop wind energy technology. They are developing a system to economically capture the increased wind flows at the edges of commercial building rooftops. They have engineered this system,... Read more

Dear All!

I recently met a passionate new hire at an architecture firm in NYC.  Her firm is reluctant to taking meaningful steps towards increasing sustainable impacts of their projects.  (Their work is in market rate of all types.)  This new hire is frustrated with the lack of sustainable adoption and understanding.

What would... Read more

Has anyone come across any (embodied) carbon emissions calculator for water?  Perhaps per region/state?  

Thanks in advance!

Looking for the Top 10 on the 10th! webinar?  Click here.

IRA NUTS & BOLTS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

The Inflation Reduction Act (IRA) offers us a once-in-a-generation chance to equitably decarbonize the built... Read more

The current Stantec/BuildingGreen featured topic is Resilient Design. Read on to learn the essentials, and then dive deep to earn CEUS.

Also see the Material Health featured topic, and also a survey of topics trending in Stantec’s regions.... Read more

I am looking for anyone that specializes in this area, see the principles below.

http://universaldesign.ie/What-is-Universal-Design/

We have looked at HOK's Neurodiveristy document which is great. Are there other resources like this, or other designers/consultants you have worked with?

TIA

Kristen

Kristen... Read more

Sustainability leadership has requested that you take this quiz to help assess sustainability literacy across the firm. Your own results will be presented to you at the end of the quiz but will not be shared with anyone else. Only aggregated, anonymized results will be available to others.

Please don’t do research to inform your answers... Read more

Has anyone found/used a non-PVC peel-and-stick countertop film?  Working with a client on a corporate renovation, and while we've been able to find a non-PVC product for the kitchen cabinets, I can't seem to find one that works for horizontal surfaces.  And they're looking for a cost-effective and quick-turnaround solution so don't want to... Read more

Using energy for cooling during peak hours places a large demand on utilities, is expensive, and can be less efficient than off-peak energy production.

BuildingGreen-Approved Thermal Energy Storage

BuildingGreen lists a variety of  thermal energy storage systems.

About

Off-peak cooling, or thermal energy storage (TES... Read more

Dear SD Leaders: I'm writing to make sure that you've seen a letter that has been circulating protesting the ‘pro-asbestos’ rule change the EPA is considering.  The letter is soliciting firm signatures/owners (as opposed to individuals).  I encourage you to sign and/or get your firm to sign ASAP. 

Please forward as well to any firm from... Read more

As some of you know, BuildingEase is the first (FREE) platform focused on building products that combines a workflow tool, waste exchange and marketplace (yes, you actually buy it all right from the site!).

The platform saves tons of hours, major headaches and streamlines workflow within a firm and across a team.

We are going to... Read more

Hi gurus,

Do any of you have preferred portable devices for indoor air quality monitoring? I know it's hard to find apples to apples, but ideally temperature, CO2, VOC, PM2.5, PM5 would be on the list. Mid-level accuracy - better than consumer, not as $ as IAQ professional level. Thanks!

I'm curious if anyone can share their strategy on indoor air quality for the return to office. Is this something that is prioritized at your firm from a wellbeing standpoint and with the current health crisis at hand? Lendlease is looking into options to safeguard our employees/occupants as we move back into the workplace and I'm researching... Read more

Hello all,

I have a quick question for you. While Energy Star appliances are a no-brainer for projects, I don't see a hard requirement to select Energy Star appliances in the energy prereq/credit. There are references in the water section for water using appliances like ice machines, dishwashers, clothes washers, etc., but no related... Read more

Hi all,

We’re thrilled to share that registration is now open for our All-Networks Workshop on Integrated Design + Delivery from the Inside Out! The workshop will be held on July 15th at Miller Hull’s Seattle office, right before the Summer 2024 SDL Summit. Register now before it fills up, and please feel free to email me with any... Read more

Welcome to the quiz portion of BuildingGreen’s Top 10 Green Building Products for 2018.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Explain the transparency and optimization criteria in the LEED v4 (applicable to  Building Product Disclosure and Optimization credits in LEED v4 BD+C and... Read more

Hi folks,

There are a few Peer-Network related opportunities at the AIA Conference on Architecture, and it's coming up soon (June 4-8)! If you'll be in town, I hope you can join us! And if you're speaking at the Conference, let us know--whatever people in this network are talking about is likely to be super-interesting to the rest of us... Read more