Has anyone had any success with achieving the LEED Building Envelope commissioning points with an alternative compliance path using the requirements of the PHIUS verifier? It seems like an unnecessary duplication to ask the client to pay for a BECx agent and a Passive House verifier. Or am I missing something? I can't find any LEED... Read more

Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon construction, however, may be less familiar. 

Contractors are just... Read more

Food waste is a major source of greenhouse gas emissions from landfills due to methane released during anaerobic decomposition.

BuildingGreen-Approved Composters

BuildingGreen approves in-vessel commercial composters, which require the smallest footprint and are most likely to be suitable for a densely populated area.

Why... Read more

Apologize in advance if this has been posted before but we are trying to get manufacturers of stage curtains to give documentation that proves that the product does not have halogenated fire retardants. Manufacturers say they don't have them or concentrations are limited to 100ppm but they don't seem to have documentation to provide for it.... Read more

Are any of you working on projects that are pursuing the additional point for Indoor Water Use Reduction on a HC project via Table 4 Compliant laboratory and medical equipment? If so, what sterilizers are the projects using?

We are receiving pushback that the Sterilizer metric doesn't make sense. I am interested in any insight or a... Read more

Welcome to the quiz portion of Better Steel, Lower Impacts!

Learning Objectives
Upon completing this course, participants will be able to:


Understand the process of how steel is made.

Recount how the U.S. steel industry has been improving its environmental footprint, while improving product performance.

... Read more

Hi everyone,

As you may know the ICC has changed the way the IECC will be written in the future and most of us think that will reduce the stringency of the future energy codes that are the biggest lever in the fight against climate change within the buildings sector.

So one of the best pathways forward is via ASHRAE, which has a... Read more

There are so many great contractor-related sessions at Greenbuild this year! I doubt I'm alone in trying to choose between sessions.  

Is there interest in debriefing with SCLers the week after (say Novemeber 9th at 2pm ET?). We could share the golden nuggets from the sessions we attended, saving everyone from wading through the session... Read more

Happy new year everyone!

My name is Vandita Mudgal, I am the first ever 'Sustainability Engineer (district)' for Hensel Phelps N. California district (covers Nor Cal and Pacific NW). As mentioned, this is the first ever sustainability position at Hensel Phelps, therefore I am developing a lot of processes and systems for our district... Read more

Hello everyone!

I'll be using this thread to post call reminders and notes.

To start us off, the next call is this coming Tuesday, March 24th at 1pm Eastern.

The topics we will be discussing include:

Around the “room” quick check-in. How’s everyone doing? What’s top of mind for you? Able to keep projects and... Read more

Hi everyone,

Since I know we have a lot of talented people in this group, I'd like to reach out to those of you based in Los Angeles and see if anyone is interested in talking at an upcoming Living Building Challenge collaborative event.  The topic of the meeting is "Selecting Healthy Materials 101: From the perspectives of... Read more

Hi Brilliant People: 

I'm hoping you can help me with a quick research question. A local colleague is trying to make the case to replace an existing old slate roof with slate vs. "slate look" asphalt shingles on a local public historic building. The bids are 6X higher for slate over the alternative 25-30 year solutions. They understand... Read more

At our SAL call today, folks were talking about how there was just too much to read about DEI. This is the best short summary I have read about the problems of incorporating it into the organizations where we work. It's much easier to talk the talk than to walk the walk because it takes time and accountability.

Hi all,

My office is looking at some certification options for our upcoming renovation. One thing the management team asked me that I don't have a solid answer for is, do WELL certified spaces typically go through with recertification and everything it entails, or are they doing the upfront work to get certified and then letting it lapse... Read more

Are FSC glulams available? By many manufacturers? Which ones?

As the managing editor at BuildingGreen, Elizabeth oversees the day-to-day operations of the editorial department and writes and edits content for publications. As sustainability consultant, she leads components of consulting work related to sustainable strategy, organizational change, socially responsible practices, and stakeholder engagement... Read more

In looking for ways to reduce jobsite waste and lower our carbon emissions, I'm working on a business plan for centralized procurement, in lieu of individual project purchasing their own tools, PPE, & consumables.  I'm curious as to how many other GC's on here use (or have used) a central purchasing process and if you have any pros/cons... Read more