Medium-density fiberboard (MDF), particleboard, and interior-grade plywood can emit formaldehyde, a known human carcinogen. Some materials  come from non-sustainable sources.

BuildingGreen-Approved Panels

Products meet California Air Resources Board (CARB) ultra-low emitting formaldehyde (ULEF) or no-added-... Read more

Have you been perusing the recently launched Contractor's Commitment and thought to yourself, 'Companies are going to need more guidance/templates/resources if they're actually going to implement this thing'? Good--now's your chance to help develop those resources.

The Contractor's Commitment Working Group is meeting December 1, 1pm ET.... Read more

Hi SDL: Please see attached letter to USGBC about the urgent need to address climate change in the next iteration of LEED v4. It's based on the realization that in the last few years it has become clear that climate change has become the dominant global threat to humans and our fellow species. And it has also become clear that the steep... Read more

Hi Sages,

As you may have seen in my message, the Peer Networks Member List is not very helpful to us (yet), because a person can only show up in one network. Many of us are also in SDL or other networks; there are many more of us than show up when you filter that list for "Sages."

Until we can get that fixed, we'll share the... Read more

Hello Sustainable Design Leaders!

I have an exciting announcement today, fall Peer Network events are now open for registration! You can see all the event details and register here!

Based on feedback we received from past events and the most recent surveys, we decided against doing one long week of events for this fall and instead... Read more

All--

A few months ago, I sent around a note about an article I was writing about the state of post-occupancy studies. It finally came out, in the latest issue of Metropolis. Great quotes and work from Payette, EDR, KieranTimberlake, HKS, and others. Thanks to all for helping with this.

I don't believe it's available online yet,... Read more

Hello Gurus,

I’m writing to share with you an effort a small group of lighting designers from the Boston area started which is now rolling into a large scale effort.  We’ve put together a Lighting Advocacy Letter to accelerate the sustainability of lighting products. Inspired by the AIA Materials Pledge, the letter is intended to... Read more

Concrete and other cementitious materials have both environmental advantages and disadvantages. As builders and designers, should we be looking for alternatives or embracing concrete over competing materials?

This special report takes a look at how these materials are made, presents the key environmental considerations relating to their... Read more

Welcome to the quiz portion of Improving Resilience!

IMPORTANT: This quiz covers five related articles within this topic. 

Learning Objectives
Upon completing this course, participants will be able to:


Hey Everyone!

We are delighted to share a major milestone in our commitment to sustainable design. After two+ years of intensive research, refining, and internal application, NBBJ is thrilled to announce the external launch of ZeroGuide, an innovative tool for early-phase carbon estimation, now available to the entire AEC community!... Read more

Electrochromic glazing holds the promise of less glare and better energy efficiency with fewer moving parts. The reality is much more complicated and includes information you won’t... Read more

Curious if folks know of any resources on hempcrete, specific to durability.  We have a one-story carbon-neutral operational energy project where the design team and client have bought into the aesthetics and carbon-sequestering potential of hempcrete, and amazingly it is looking to be no more expensive than a more typical concrete wall... Read more

Hello Green Gurus,

Here are all the details about our two Peer Network events in Chicago on Tuesday, June 21st. If you'll be in town, we hope to see you!

From 1-5pm we'll have the Chicago/Midwest Region Mini-Summit, open to members of any of the five Peer Networks (Sustainability Consultants, Community Design Leaders, Contractors... Read more

Our Green Team is holding a Biophilic Design workshop on Earth Day with our own staff for biophilic interventions within our office space. We are referencing the Biophilic Design Guidebook from LBC but it will be a shorter time frame, about 1.5 hours total. Last summer we introduced biophilia to the office through the exercise where each person... Read more

For those of you working in jurisdictions with both prescriptive and performance-based commercial energy code pathways, roughly what percentage of your projects are using the performance pathway? How do your project teams decide which pathway to follow?

In Minnesota we are seeing very few projects pursuing the performance pathway,... Read more

Hello All! 

We are using TallyCat to extract quantities from our REVIT Model, and bring them over to EC3 to get a model GWP (focusing on material categories required to evaluate ILFI Zero Carbon certification).  There are a number of questions that are popping up!!

I am sure there are others trying the same thing, yes... maybe?! ... Read more

Hi gang,

Following up on the recent Air Quality Design Jam at the summit, I’d like to round up the folks interested in supporting an Air Quality Working Group.

Didn’t attend the summit? No worries – everyone is welcome! We had a good group the other week and several of us want to continue the conversation.

The design jam... Read more

BITuser Meeting:  5/23/18

Participants:  Shane, Andrea, Angela

Notes:

Southface to provide "style tiles" before 6/15 
Greg to send to Andrea, couple dozen images for Best Practice pages
Southface will send, in week to 10 days, "full content" for BP03 - Energy Audit 
(BP03 "full content" will address... Read more