Forum topic
Friends of EPIC –
Hey, everyone. As some of you might have heard, we’ve been working for a while with Autodesk to get c.scale (the data model behind EPIC) built into Forma – Autodesk’s AI-powered planning tool. Forma is packaged within Autodesk’s AEC collection and most firms using Revit should already have access. This integration is... Read more
Forum topic
Happy Thursday, all!
I will be presenting with my colleague, Emily Hoffman, and our counterpart from Seattle, Duane Jonlin, on how firms can contribute more to aggressive energy and carbon targets, from the perspective of three people that see thousands of projects each year. We see the best and the worst, and we're convinced that our... Read more
Forum topic
Hi All,
Has anyone dug into ASHRAE 2016 as part of the new v4.1 requirements or as codes start to adopt it? I recently presented on this and thought I should check my math to make sure I'm understanding and communicating this correctly.
My understanding is that there is a new reference baseline, that is essentially the ASHRAE 2004... Read more
Forum topic
Hi all,
We have a newly constructed, core/shell project having some hot water issues in the core restrooms.
There is a 0.35 Toto lav installed throughout. The hot water heaters are adjacent on each floor, located in the janitor closets. We did the math, and there could be a gallon of water standing and cooling in the pipe between... Read more
Forum topic
Good morning, All,
Just a bit of news this morning. My family and I are moving back out west! I am continuing in my current role with EwingCole, but will be doing so from Portland, Oregon. Although North Carolina has a been a wonderful place for us for the past 13 years, it is time to be close to family in the northwest and southwest... Read more
Forum topic
Hi Everyone - I hope this isn't a repeat topic. We are starting to get familiar with TallyCAT at SAR+ and have a few people testing our projects in it. Is anyone willing to help us troubleshoot or share lessons learned? We're running into a few errors and wonder if our Revit models and workflow are the issue, or if we need to be doing something... Read more
Forum topic
Here's the Core Purpose for this group that came out of the Inaugural Summit.
We're off and running!
Quiz
Welcome to the quiz portion of LEED 2009: The Missing Manual.
Learning Objectives
Upon completing this course, participants will be able to:
1. Stay abreast of changes to LEED NC-2009.
2. Understand the more ambiguous aspects of LEED NC-2009.
3. Explain key interpretations of LEED NC-2009.
4.... Read more
Forum topic
Congrats Nadav!!!! https://www.aia.org/showcases/181011-nadav-malin-hon-aia?utm_source=Buil...
Author
As BuildingGreen’s Content & Data Wrangler, Fran is a spreadsheet and content-management wiz who:
crunches data for our consulting team’s product vetting works internally and with our education partners to manage our continuing education program supports the editorial team with Drupal magicFran also compiles data submissions... Read more
Forum topic
Hi there SD Leaders,
We're running an LCA on one of our projects that's about to start construction that has had serious embodied carbon goals and I got a result that really surprised me. I haven't been able to find any obvious/glaring issues with the work, but these results are strange enough that I'm not feeling confident. I'm hoping... Read more
Product Guide
Conventional heating systems burn fossil fuels on the building site or use outrageous amounts of electricity.
BuildingGreen-Approved Heat Pumps
The best heat pumps solve both these problems and provide efficient cooling. BuildingGreen approves air-source heat pumps with minimum HSPF and SEER levels of 10 and 20, respectively.... Read more
Forum topic
On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more
Forum topic
Has anyone completed an LCA for an engineering structures lab, particularly one that has a strong wall and strong floor?