Hi All,

USGBC MA is doing a study on the cost of net zero energy buildings in MA.  I’m wondering if you all have any data to share on plug loads in ZNE projects. I’m looking for single family res, 2-4 unit residential, +/- 60 unit residential, 10-12 story office, and k-12.  The engineers have presented initial results and their... Read more

Hello All,
Checking in on experience with Armstrong's Tectum E-N with NEOPOR Graphite polysytrene GPS rigid foam insulation core in roof panels for exposed structure?
BASF says that NEOPOR uses up to 30% less material than other rigid foam; it is greenguard gold cerified. 

Interesting that the NEOPOR increases in R-value as... Read more

Evaporative coolers use far less electricity than conventional refrigerant-cycle air conditioners and they operate without the use of refrigerants, both features that make them attractive for green buildings. However, their suitability is limited to drier climates, and most products use significant quantities of water.

BuildingGreen... Read more

Welcome to the quiz portion of Choosing Insulation: High-Performance Wall Assemblies – Unit 3.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe key environmental and performance factors for insulation materials.
2. Recount bottom-line insulation material... Read more

Good morning. If you're worried  like I am by today's new IPCC Report and would like some helpful explanation I recommend reading climate scientist Zeke Hausfather's lengthy Twitter feed summarizing key aspects with graphics. It's here https://twitter.com/hausfath/status/1424642708291821569?s=21

of course we need to see this as an even... Read more

I'm looking for products that have cradle to cradle documentation, as well as EPD's & HPD's and are red list free.  What are your go to websites when you're researching products?

Mark your calendars Sustainable MEP Leaders!!
Here are the details to save the date for the 2020 MEP Summit:

Date: June 9th and 10th, 2020
Location: Stantec Office in Denver, CO
Schedule Outline: Tues. 9th beginning with Lunch at Noon, ending Wed. about 3pm

Gather and learn from your peers! Share your challenges... Read more

We're wrapping up a multi year project that went through multiple design changes, leaving us with a ton of material samples.  Does anyone know of a good place we could donate these samples to, to keep them out of the landfill.  I'm in the greater Seattle area.  Thank you for any suggestions.

We have an environmentally-minded client who asked us to look into an alternative to the blue adhesive film that is typically used to seal uninstalled ducts for IAQ purposes. From a human health and waste perspective, they were hoping to find something that was both plastic-free and reusable. Has anyone tried out other options? I thought it was... Read more

Hey Everyone!

We are delighted to share a major milestone in our commitment to sustainable design. After two+ years of intensive research, refining, and internal application, NBBJ is thrilled to announce the external launch of ZeroGuide, an innovative tool for early-phase carbon estimation, now available to the entire AEC community!... Read more

Currently, the BIT User site is fully accessible without having to log in (unless you want to edit or add content, of course). The time has come, however, to start restricting access only to logged-in users.

Which sections will be freely visible, and which will be visible only to registered users? Here's what I recall from our earlier... Read more

...for all the folks on the west coast.

It’s smokey out there. For anyone looking for a cheap and relatively effective way to clean your indoor air, here is an article on a DIY box fan filters. 

https://www.texairfilters.com/a-variation-on-the-box-fan-with-merv-13-filter-air-cleaner/

This PSA is from our friends at NEEA (... Read more

Hi All -

I have a non-profit project that has a lot of wood structure to it, but the truss suppliers have both said they cannot get FSC wood for the project.

So, looking at the Legal Wood Pilot Credit, I need some help.  Can anyone tell me where i can find the definitions between "legal", "responsible" and "certified" are? (I'm... Read more

Hello, 

I am struggling with understanding if I should be using Annual Marginal Emission Factors (MEF) or Annual Average Emission Factors (AEF) for evaluating different building design decisions.

Everything I know is from this document. So as I understand it ... an individual building or retrofit is going to change the marginal... Read more

The 2018 ENR Green Building Survey is due March 16th.  I'm sure you all know the metric they use to evaluate your ranking is solely the revenue from projects pursuing a green building certification in the previous calendar year.  Personally, I think this totally bogus.  How "green" a contractor is may correlate with how much revenue they have... Read more