Hello,

As with most people I feel some what helpless about what the next 4 years will bring. Heather Clark, Senior Director for Building Sector Climate Policy at The White House thinks that a big bill will be presented in the new year and one of the small items in there will be the axing of the Inflation Reduction Act. What she made... Read more

Can anyone recommend waste haulers and processing facilities that are LEED compliant for processing commingled waste in the DC / MD area?

I know this is the Sustainable Construction Leaders and not the LEED Construction Leaders, but with waste management being such a big part of what we do, I wanted to crowd source a request for help.... Read more

Anyone aware of tools or workflows for modeling of a specific outdoor space and effective surface temperatures?  We've done a goodly amoutn of microclimate simulations, but never explicitly factored in the ground surface, in terms of emissivity and other related factors.   

Hi, I've been following the copper piping discussion and am wondering if copper piping has been a problem in greywater systems.    We've used Aquatherm to some extent in greywater treatment.

Upman LaTole

Has anyone used the new 3M Smog-Eating Granules on a roof before? Malarkey and Soprema are offering this as an option for their roof shingles. Seems like a great technology for urban areas, but I'd be curious to see if anyone here has actually successfully specified and installed it.

https://www.3m.com/3M/en_US/roofing-granules-us/... Read more

Hi! Just saw this White House press release stating that federal suppliers will need to report on scope 1 & 2, and relevant scope 3 emissions and climate-related financial risks as well as set science-based emission reduction targets. The cutoff for disclosure requirements is $50m in federal contracts. Curious whether this affects any... Read more

The opportunity for water savings from installing efficient toilets, and from toilet replacement, is significant. In addition to improvements to the traditional gravity system, pressure- and vacuum-assisted flushing systems are available that offer superior performance—albeit often with some increase in flushing noise.

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Glazing is by far the most complex single component of our enclosures and it must be climate-tuned to boot. Getting the amount, the location, and the performance attributes of glazing is key to... Read more

I wanted to post a reminder for you all that the Sustainable Design Leaders Summit will be kicking off with a Pre-Summit workshop in Seattle July 31st, 9am - 3pm. If you are interested in joining your peers for this workshop, please see the registration link below. Also, if you know someone in the Seattle area that would be good to have in the... Read more

We broke up into 5 discussion groups by market sector:

Here are the proposed "guiding questions":

Welcome to the quiz portion of The PVC Debate: A Fresh Look.

Learning Objectives
Upon completing this course, participants will be able to:


1. Examine the actual cost-effectiveness of PVC in terms of quality.
2. Explain what makes PVC a health hazard.
3. Recognize market effects of PVC's durability and... Read more

Hello Green Gurus,

Thank you for your patience while we pulled together the summer summit reports and getting them posted, sorry it took so long!

You can see the most recent summit reports for SDL, SCL, and MEP near the top-left of the Resources page in the Peer Networks Hub.

A friendly reminder, these reports are sharable... Read more

Hi all,

We’re thrilled to share that registration is now open for our All-Networks Workshop on Integrated Design + Delivery from the Inside Out! The workshop will be held on July 15th at Miller Hull’s Seattle office, right before the Summer 2024 SDL Summit. Register now before it fills up, and please feel free to email me with any... Read more

We all know the climates are shifting, and the ASHRAE standard that gets invoked for energy codes is shifting along with them--though not in perfect sync.  Louisiana is leaping from ASHRAE 90.1-2007 energy code to 2021 IECC (boom!).  The 2021 IECC as published uses relatively old climate maps; for Louisiana, at least, the same as the 90.1-2007... Read more

I'm curious who in this group has used ASHRAE Standard 209-2018, Energy Simulation Aided Design for Buildings except Low Rise Residential Buildings?

We've used it internally (minimally) as a reference to help better communicate the goals and activities involved with energy modeling at various phases of design. But it seems like there's... Read more

The Minnesota CLF chapter’s Specification Subgroup (myself, Andy Marolt/Ryan Companies, Laura Eder/ESG, Java Nyamjav/MSR Design, with input from Annie Perkins/SFI) recently collaborated on a draft set of specification templates incorporating embodied carbon requirements into product performance and action submittals. This work builds on sample... Read more