Has anyone had a Contractor track GHG emissions during construction? If so, any advice on how to include that in the project specifications?

Thanks!

Yarden

Can you comment on successful ways you have used eQUEST and pitfalls you have seen? We are considering training our architects to use it for early building analysis on all projects. 

Has anyone used Insight for Revit to document the LEED Daylight Credit If so, would you recommend it?

Thanks,

_Ilana

Thought this was worth sharing - Lance Davis, who manages the P100 program for GSA just posted to an email group i belong to that the GSA P100 program is to be updated in 2024.  In service to that, there is a "P100 Change Proposal Form" available for folks to make helpful suggestions.

They are asking for suggestions, i think we should... Read more

My firm is mobilizing for a year of carbon awareness and reduction that goes beyond the energy consumption of our designs. We are looking to hire a full time person to take on LCA tracking for our current projects. Ideally it is a climate crisis super-hero of sorts who could also look at our design process and help develop multi-faceted... Read more

Welcome to the quiz portion of Community-Scale Sustainability: Accelerating Change for People and Planet

Learning Objectives
Upon completing this course, participants will be able to:


Explain how combining stakeholder efforts and resources can achieve greater resilience and sustainability for communities.

Discuss... Read more

At the start of 2021 there was one signatory to the contractors commitment (thanks Leopardo!).  Today, there are 12 companies participating, representing over $24 Billion in total revenue.

We don’t always give ourselves enough credit or take enough time to savor our accomplishments because there is always more to do.  But, this is a big... Read more

Hello - I have met several of you virtually over the last couple years. My name is Megan Zack and I am excited to share that I have changed positions and will be the Cheif Sustainabilty Officer at Wight & Company. After spending the last 20 years working as an architect with a small percentage of my time dedicated to sustainabilty, I'll be... Read more

Curious to see if your firms have researched metals and established a preference for what you use for roof and wall panels?  I'm interested in ranking environmental performance for painted steel, galvanize steel, weathered steel, painted aluminum, zinc, etc.

People tracking pollutants and dirt into buildings can cause indoor environmental quality (IEQ) problems, increase maintenance costs, and reduce the life of the floor. When they track rain and snow on hard surfaces, it increases the risk of personal injury due to slips and falls.

BuildingGreen-Approved Track-Off Systems

... Read more

ASHRAE 209 in all its glory has been uploaded. This will impact our architectural process, for better or worse, so we should embrace it and learn from it. The revised AIA Energy Modeling Design Guide (due out next year) has been timed to correspond roughly to 209 coming out and will include references to it. The first few energy modeling '... Read more

Hi all - passing on this request on behalf of Alan Scott. He is looking specifically for someone from the Gulf Coast region to round out the panel:

I am putting together a panel for a virtual session during Design Museum Week in April (Thursday, April 28). The description below outlines the conversation I am hoping to curate. I am... Read more

I am brushing up on current tools for local government greenhouse gas inventories and was wondering if any of you have used the EPA's Local Government Greenhouse Gas Inventory tool? Download the Local Greenhouse Gas Inventory Tool | US EPA 

Some of my immediate questions include: 

Is the EPA tool straightforward to use?

Are... Read more

Protection against corrosion is the primary function of steel coatings, which often contain corrosion inhibitors, volatile solvents, heavy metals, and other hazardous chemicals.

These coatings are specified when steel is used structurally, outdoors, or in high-use areas. In these situations, hazardous coatings are often applied off-site... Read more

Welcome to the quiz portion of Video: Insights to Success on LEED-CI Certification.

Learning Objectives
Upon completing this course, participants will be able to:


1. Identify key changes to LEED CI 2009 (ID+C).
2. Identify the circumstances of a LEED-CI project that challenge the abilityto certify.
3.... Read more

Hi everyone, it was so great to meet some of you at the winter summit and finally connect names with faces!

We have a project that is targeting CalGreen Tier 2 and LEEDv4 Platinum.  Thought I'd reach out to see if anyone on this forum has found comparison guides between the two?  Looking for something similar to this CalGreen 2013 tier... Read more