Hi All, 

The rural concrete supplier that is used for most of our projects sources their fly ash from a nearby coal burning plant that is scheduled to be closed in the next two years. In anticipation of this, they are looking into alternative fly ash sources and SCM options and we'd like to provide suggestions.

Does anyone have... Read more

Hello, All,

Does anyone have experience with cove.tool (https://covetool.com/)?  Perhaps for those projects that may not get fully modeled, or as a tool to help set baselines?  It came across our radar recently, and I'm wondering if the subscription might be worth a try.

Thanks! 

Maria

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Whole-building life-cycle assessment (WBLCA) can help project teams reduce embodied carbon as well as many other environmental impacts of building materials. And it’s incentivized in LEED and... Read more

Carpet cushion may emit VOCs or contain halogenated flame retardants that can slough off in dust.

BuildingGreen-Approved Carpet Cushions

BuildingGreen approves carpet backing made from natural materials as well as synthetic commercial products that meet the Carpet and Rug  Institute’s Green Label standards.

... Read more

Ben Hewitt works behind the scenes to build and maintain BuildingGreen.com and LEEDuser. He brings with him over two decades of experience in his field. As an efficient problem-solver, his goal is to make the websites more user-friendly for his coworkers and designers and project teams using BuildingGreen’s resources.

Ben has proficiency... Read more

There are a few spots left for the 2018 Summer Architecture + Design Sustainable Design Leaders Summit that is being held August 1-3 at the Garrison Institute in Garrison, NY (Easy train ride from NYC). If you have not already received an invitation, and you play a sustainability leader role - either formal or informal - in a mid-sized (>40... Read more

All,

I'm looking for a quick methodology to estimate GHG emissions from refrigerants on a per SF basis. Are there any benchmark studies or quick calculators similar to the embodied carbon study? https://carbonleadershipforum.org/embodied-carbon-benchmark-study-1/

Thanks,

Josh

Welcome to the quiz portion of What Makes Plumbing Green? BuildingGreen’s Guide to Plumbing Products.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how plumbing products affect the environment in ways that go far beyond water consumption.
2. Describe ultra-high-... Read more

Hi all,

We are designing a mass timber building and are closing in on selecting our mass timber supplier.  One supplier is offering FSC wood and the other is offering PEFC.  I don't know enough about PEFC to make a clear recommendation to the client about how it compares to FSC.  I understand that PEFC endorsed SFI, so that concerns me... Read more

On our Contractor Coffee talk a few weeks ago, Emi LaFountain (Turner Construction) brought up the idea that there was a lot of blue stain wood that are being landfilled instead of used, and suggested that maybe the designers among us could find a way to turn ugly into beautiful.

I had never heard of this issue, but I was on a call the... Read more

Hi folks -

I was contacted last week by the producer of the documentary that launches this Thursday, 12/10 - he is hoping to generate interest among folks across the environmental spectrum (which of course includes all of us!) so I am sharing his pitch below with you all. The subject of water scarcity and drought is only going to... Read more

Hi Fellow Design Professionals: It would be great if you could participate in this important research on the status of professionals addressing extreme heat.

Thanks.

MAL

Planning for Extreme Heat Survey

Our research team from the University of Arizona and Arizona State University is studying how planning... Read more

Hi all! During our Contractor’s Commitment call last week Amanda made a great point about sharing of waste data to gain some realistic, current metrics. Just like I assume many of you, we have both seen a decline in successful diversion these last few years and our companies’ overall percentages have taken a hit. In an effort to gain a full... Read more

Has anyone worked on a project installing a PowerNest system?  I just found out about it today and would love to get working information on it.  

Here's the link, in case its new to you as well. https://www.ibispower.eu/home

Thank you -

Welcome to the quiz portion of Finding Products for LEED v4 and v4.1!

Learning Objectives
Upon completing this course, participants will be able to:


Hi folks,

We've got another timely and engaging webinar lined up! Join Panama Bartholomy and Peter Rumsey for the latest on electrification policy and applications. (As always, if you can't make it at this time that's ok, we'll be recording it.) 

Register here to get the link: https://www.buildinggreen.com/peer-networks/webinars... Read more

I'm hoping that some of you know someone with strong energy modeling skills who is looking for a job!  Moseley Architects is recruiting for a full time energy modeler (ideally either in our Richmond, VA or Raleigh NC office) to help us continue to press forward with understanding and reducing the energy impacts of our designs.  The job... Read more

I've been seeing Armstrong's DC flexzone ceiling system at Greenbuild for many years. I'm working on a net zero project with LED lights and solar panels. In theory, the transmission losses in going from DC power from panels to AC for the building to DC for the lights would be eliminated. But does anyone actually have experience using this... Read more

For those who are visiting Chicago, Kira Gould has asked me to spread the word about a casual AIA COTE meet-up. Stop by, meet friends and have a beer.

If you will be in Chicago on November 15, please consider joining a casual meet-up of COTE leaders/members/friends (no fee to join; it's pay-your-own-way at the pub):  

AIA COTE... Read more