Join us for the Peer Networks-exclusive version of this Greenbuild presentation!

Register HERE.

A New Standard in Facade Design
November 30th, 2020
1pm - 2pm ET (10am - 11am PT)

Description and Presenters: Current façade design focuses more on operating carbon (or energy), even when embodied carbon is accounted... Read more

We broke up into 5 discussion groups by market sector:

Here are the proposed "guiding questions":

Hi MEP Leaders,

A reminder that our monthly call is next Tuesday, June 13, at 2:00pm ET, and all network members are welcome to join!

Here is the agenda and below is the Zoom link:

Join Zoom Meeting
https://us02web.zoom.us/j/83598691786?pwd=MjI2S01yZUJRSG4zcXRBNWtPbE5RZz09

Meeting ID: 835 9869 1786
... Read more

Caseworks can be made from unsustainable wood and other materials, and with adhesives and finishes that offgas formaldehyde and other hazardous compounds.

BuildingGreen-Approved Casework

Approved caseworks are:

Hi folks,

You may have seen this posted to the Green Gurus forum. Paula got some good responses from architects and engineers, but not so much from GCs so she asked me to follow up and post it here. Please reach out to her if you're willing to be included in these articles/reports. Thanks!

Hi! I’m working on two reports about... Read more

Pipe that delivers domestic water in North America is typically made from copper, chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX), all of which present environmental challenges. Bimodal polyethylene  (PE-RT) and polypropylene (PP) are potential alternatives with lower climate and health impacts.
... Read more

Hello Green Gurus,

Here is the information for our second Peer Networks Webinar this month, coming up next week: Better Products = Better Buildings (Low Carbon Specs). We hope you can join us!

Register HERE.

Better Products = Better Buildings (Low Carbon Specs)
Thursday, May 19, 2022
1 - 2pm ET (10 - 11am PT)... Read more

As we begin to look into Scope 3 emissions reduction strategies, it's important to understand ways to reduce tranportation emissions to project sites. Is anyone aware of best practices or programs for contractor carpooling to jobsites? I know many of my colleagues travel to work together in one vehicle because of parking limitations, however,... Read more

Concrete and other cementitious materials have both environmental advantages and disadvantages. As builders and designers, should we be looking for alternatives or embracing concrete over competing materials?

This special report takes a look at how these materials are made, presents the key environmental considerations relating to their... Read more

Hey, everyone! Reaching out to share about the currently-under-development IEA Annex 89: Ways to Implement Net-zero Whole Life Carbon Buildings. The current committee is really the who's who of building LCA in Europe, but it does seem like it suffers from a lack of North American representation. The one North American on the committee, in fact... Read more

We should probably agree on the correct spelling for what we at BuildingGreen are calling "BITuser." I noticed that on the Salesforce portfolio screenshot provided by Dennis, it's spelled "BIT User."

BITuser has the advantage of more closely resembling LEEDuser, but it has the disadvantage of looking a little weird in all-caps, as in... Read more

Has anyone used a commercial heat pump water heater for a large protect?  I have found a few manufacturers for this technology, but want to make sure this is a viable and cost approach to electrical eliminate gas on a path to all electric.

On behalf of the LFRT IRA working group, I am writing to see if anyone has applied for IRA funding (48E, 45L, 179D) for their project, and is willing to share their experiences and basic project info with us.  We can keep the project name confidential if needed.

Thank you!

First, there was Energy Use reductions

Then there was embodied carbon

Soon it will be refrigerant use/leakage calculations

…and much more

As coordinators and leaders of project teams, what does this look like for the practicing architect and our collaborators?

I have no idea. BUT I’m guessing someone is... Read more

Hello all,

I need future weather files for a project. We are looking at three years, 2050, 2075, and 2095 using two climate change scenarios, low emissions, and high emissions. I have seen ARUP's Weathershift site that uses RCP 8.5 and RCP 4.5. Are we assuming that 2.6 is not achievable? I would have used this as a low emissions scenario... Read more