Call for Reviewers and Call for Proposals now out.  If you're not planning on submitting a proposal to present, please consider volunteering as a reviewer, subject matter expert or member of the Program Working Group.  The quality of the education program is directly proportional to the people who select it!  

See many of you in Alabama... Read more

Glazing connects occupants to the outdoors, but with so many opportunities for air leakage, poor insulation, and thermal bridging, glazing is the primary weak link in building energy performance.

BuildingGreen approves glazing that offers strong energy performance properties for a variety of... Read more

Welcome to the quiz portion of Innovative Products and Technology from the Greenbuild Expo

Learning Objectives
Upon completing this course, participants will be able to:


1. Direct attention to green building products and technologies that show exceptional potential, from a whole-systems perspective, to bring the... Read more

I was talking to Nadav recently about job posting opportunities through Building Green and/or through the Peer network.  He shared this topic has been discussed in the past, and thought I should send a question out to the network.  I am guessing many of you are looking for talent right now too?  Wouldn't it be cool to know people of have been... Read more

High-performance buildings integrate site-responsive orientation, climate-responsive form, hefty R-values, efficient mechanical systems, healthy... Read more

Are you ready to share the story about your best projects?

AIA COTE Top Ten Awards is a great way to get recognition for your best work and the call for submissions for the 2024 cycle is now open!

The awards cycle has shifted, and the deadline for the 2024 awards is October 26.

So NOW is the time to pull together... Read more

Please see the following invite from Professor Alexandra Rempel at the University of Oregon to participate a 15-20 minute phone/Zoom interview and share your experience and/or perceptions on the problems, challenges, and barriers to incorporating into your projects.

This effort is part of an NSF research grant that I am involved in and... Read more

Hi All,

USGBC MA is doing a study on the cost of net zero energy buildings in MA.  I’m wondering if you all have any data to share on plug loads in ZNE projects. I’m looking for single family res, 2-4 unit residential, +/- 60 unit residential, 10-12 story office, and k-12.  The engineers have presented initial results and their... Read more

I am dual posting a topic from the SDL forum in the Green Commons. Sorry to those who see this twice but I'm trying to cover more ground.

The first post from Mike Manzi ... 

SDLers,

Great to see many of you at Greenbuild! It was nice to have the opportunity to remind everyone how our collective energy continues to make a... Read more

Hi folks,

Some of you have seen me do a 5-minute presentation on an initiative to divert urine from wastewater. That team is now developing a building-scale urine treatment technology with support from the National Science Foundation's Small Business Innovative Research (SBIR) award. 

In order to learn more about the sustainable... Read more

Hi All, 

My understanding is that SCL reporting is only for refrigerant use, or recharging for headquarters. I've asked our MEP contractor for a list of our 21 units, refrigerant use, and what quantity of refrigerants were used to charge equipment during installation or service.  

Is anyone tracking this for job sites?... Read more

We just heard from one of our more progressive clients that they are pulling Mohawk from their shelves and are no longer allowing it on their projects. Apparently there are some chemical ingredients they objected to, but more importantly the manufacturer "lied" to the client about the content. Does anyone have an idea what this might be about?... Read more

Can furniture be hazardous? You bet it can…

From flame retardants in foam cushions to unnecessary stain and dirt repellents on upholstery materials, everyday... Read more

Hi Folks, anyone in Boston (or willing to move) this could be a super cool opportunity for you! 

https://careers-bpda.icims.com/jobs/1557/senior-resilience-design-reviewer/job?mobile=false&width=805&height=500&bga=true&needsRedirect=false&jan1offset=-300&jun1offset=-240

I thought some folks here might be interested in a webinar we have coming up this Thursday 12/6 on the topic of best practices for occupant comfort surveys. Although this webinar is part of our Roast launch series, it will be tool agnostic, with information that will be applicable to any occupant survey regardless of tools used. 

To... Read more

Hello,

Are you aware of any bldg codes that have included requirements related to Material Health?

Thanks!

Mona Lemoine Architect AIBC, MRAIC, LEED AP BD+C, LFA, Regenerative Practitioner, RELi AP

Associate, Senior Sustainability Consultant

Mobile: 236-878-1752
mona.lemoine@stantec.com

Stantec... Read more

Pipe that delivers domestic water in North America is typically made from copper, chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX), all of which present environmental challenges. Bimodal polyethylene  (PE-RT) and polypropylene (PP) are potential alternatives with lower climate and health impacts.
... Read more

Hey Gurus. Might anyone have experience, or thoughts, with regard to establishing an energy use baseline for a new advanced manufacturing facility we are working on for a regional technical community college? This type of academic facility is so relatively new, the program doesn't fall into the typical "College/University" building type from ... Read more