Hi everyone!

If you will be attending Greenbuild 2023 or live in the DC area, please join us for a Show & Tell!

When: Tuesday September 26, 6:30-9pm ET

Where: Perkins Eastman, 1 Thomas Cir NW #200, Washington, DC, 20005

Please sign up here to present/attend. Beverages and refreshments will be served. We look... Read more

We're wrapping up a multi year project that went through multiple design changes, leaving us with a ton of material samples.  Does anyone know of a good place we could donate these samples to, to keep them out of the landfill.  I'm in the greater Seattle area.  Thank you for any suggestions.

Wood decking requires potentially hazardous preservatives and stains, and plastic waste is a significant environmental problem.

BuildingGreen-Approved Decking

Composite decking approved by BuildingGreen has at least 50% total recycled content. For plastic decking, post-consumer content has to be greater than 50%.

Health and... Read more

Dear SD Leaders,

As some of you may have heard, EHDD has been working for the last year in developing a data model to support early phase goal setting for holistic low carbon design. This data model is at the heart of our Early Phase Integrated Carbon (EPIC) assessment tool. EPIC is a data-driven goal-setting tool for use in the earliest... Read more

Our Sustainable Construction Leaders peer network famously developed the Contractor's Commitment.

Famous because it is the industry's only agreed-upon framework for systematically addressing the environmental and social impacts of construction activity.

Famous because it now has 27 signatories, collectively accounting for $49... Read more

Hi - Posting on behalf of Pete Munoz at Biohabitats

Biohabitats is hiring a proposal coordinator in Portland. Please spread the word. Thanks!

PROPOSAL COORDINATOR

Cascadia Bioregion Portland, Oregon is the preferred location, but will consider Denver, Colorado or  Santa Fe, New Mexico  

Years of Experience: 5+ years... Read more

I'm teaching a LEED GA study group and was rambling on the differences between CIR and precident-setting LEED Interpretation (that gets posted in the addenda library and all). Then I went onto LEED Online and was showing how those are submitted... but can't actually figure out how a LEED Interpretation would be submitted. Has anyone done this... Read more

Has anyone here performed circadian lighting studies for WELL using rhino/grasshopper (Lark Spectral Lighting)? 

It seems that Lark can only simulate circadian metrics for daylighting, and NOT electric lighting.  Can anyone shed some light on this?  pun intended :)

Are there any other tools out there that would enable us to... Read more

Hello Green Gurus,

Back at the retreat in March 2021 (does anyone remember back that far?), we formed an Air Quality Working Group with members from SDL, SMEPL, and SCL. Drawing on our collective experience, standards, research, and other resources, we began navigating the murkiness of indoor air quality considerations. We came up with a... Read more

All,

I'm sure a few of you attended our recent  webinar on the LEED v4.1 LCA webinar. In case you missed it, the recording is posted. We were stunned by the amount of engagement from the audience; we allotted 30 minutes for questions and I think it went even longer. The webinar recording should be a great starting point for anyone... Read more

Hello Green Gurus,

Here’s a reminder that our first Show & Tell for 2021 is happening next week! Monday, February 1st from 7-8pm ET and Tuesday, February 2nd from 4-5pm ET, come see your peers from all networks present for five minutes each on a variety of topics relating to their work.

This event is connected with the Summit-... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Buildings aren’t garbage. But you wouldn’t know it by examining the way the AEC industry works. 

We typically design buildings for a single, limited purpose. We build them partly out of plastics that can’t be readily recycled. We choose diverse materials... Read more

Welcome to the quiz portion of Fundamentals of High-Performance Building Assemblies.

Learning Objectives
Upon completing this course, participants will be able to:


1. Recall how the acronym ENDURE speaks to the unifying aspect of high-performance buildings.
2. Describe how to apply the principles of high-... Read more

Sometimes referred to as “the dark side”, the construction industry isn’t actually so bad.  We are mostly good people.  And, we need good people. 

Consigli is hiring a Sustainability Manager to work in Massachusetts, and we could use your help to fill the role.  If you or someone you know is brimming with the sustainability force, please... Read more

Does anyone have an idea when the AIA Materials Pledge Reporting Framework will be available? Or is there a draft of what it looks like? 

BWBR is on a push to refine our approach towards materials. As AIA Material's Pledge signatory, we were hoping to incorporate the reporting framework into our efforts. Trying to get a sense of the... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Stick-framed walls are labor intensive and have to be sealed and insulated in the field, where conditions are not ideal; this can lead to poor thermal performance.

BuildingGreen-Approved Structural... Read more