I am looking for a healthy and safe mold preventative product to use on wood construction to prevent mold growth as this full wood building (truss, framing, exterior sheathing) will be exposed to moisture via the elements until the roof gets put on in earlywinter.

Please share your feedback, thus far we have found what looks like a lot... Read more

Entegrity is advertising for two positions for Certification experts, one in Little Rock, AR and the other remote. If you know anyone looking for a change send them my way.

https://entegritypartners.com/careers/

If you want to know more about the MEP 2040 Challenge, our first quarterly forum will be held on March 18th, 2022 11 am to 1 pm Eastern, and will be discussing decarbonization in the MEP space.  See link below for the agenda and registration.

https://network.carbonleadershipforum.org/civicrm/mailing/view?id=206&reset=1

I... Read more

Hi All! This is a question for NYC and surrounding area (but if its the right fit, could extend beyond)! 

Can anyone recommend a designer for healthy and sustainable furniture for an affordable housing development?  The spaces that need funiture are: a community facility, common spaces, and residential units (for formerly homeless). ... Read more

If only a few of the Best Practices will have checklists, which will be included under the "Implementation Toolkit" tab, I'm thinking we can simplify them (compared with LEEDuser).

I've attached a screenshot of a LEEDuser checklist. But I don't think BITuser will need the four types of icons, and the legend will take up more space than... Read more

Faucets with high flow rates waste water—not to mention the energy used to treat and deliver it to our buildings—and the additional water stresses our wastewater treatment systems.

At the recent All Networks Workshop in Seattle, I listened with interest to some conversation about including sustainability goals, KPI's, critical materials lists, and other related topics on a G-sheet in the drawing set.  This is something I had not previously considered, but would like to learn more about. 

If you work for a design... Read more

Hello Sustainable Design Leaders!

Here are the details for an upcoming SDL Peer Network web call, this webinar will be a call to share research and resources around mass timber. Hope to see you there!
REGISTER HERE!

Embodied Carbon and Mass Timber – a shared learning conversation
March 31st, 2020
3pm - 4pm ET (... Read more

Hello SCL, 

We’ve heard that some of you have a hankering to connect with this group outside of the Summit and the forum. On prompting by the steering committee, we’ve decided to try out quarterly SCL-only calls focused on a dedicated topic. 

The first of these calls will be Tuesday, April 13th at 4pm ET (1pm PT) and the topic... Read more

We have a project that is looking for plaster/stucco/textured wall products that are sustainable, or “more sustainable.”

I know these products exist, but I haven’t had to spec or work with any, so I’m reaching out.

The project is in MA, so I'm also soliciting recommendations for products and/or companies who are experienced using... Read more

We are working on a Core & Shell project with a developer that we work with frequently. I'm looking for advice on best approaches to achieving the Whole Building Life Cycle Assessment credit- we haven't used TALLY and done this type of analysis before. What are some approaches to achieving this credit that others have found successful? I... Read more

The construction sector’s take-make-waste approach to materials needs an overhaul. Materials and construction account for an estimated 11% of global greenhouse gas emissions annually. At the other end of the life cycle, demolition in the United States annually generates 90% of some 600 million tons of construction-sector debris. Getting trashed... Read more

Welcome to the quiz portion of Whole-Building Life Cycle Analysis: Promises and Pitfalls.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define whole-building life-cycle assessment.
2. Explain what whole-building life-cycle assessment can and can't do so you can work within... Read more

It is with the greatest pleasure that I announce to this esteemed group the recognition of our very own and much-loved leader Nadav Malin as an Honorary AIA member. AIA COTE had the honor to serve as Nadav's sponsor and we are pleased and delighted with this outcome (but not surprised of course.) For the record, "The AIA recognizes the notable... Read more

Hello All,

I'm supporting a project that is pursuing Green Globes and trying to get familiar with its content.  I'm hoping someone might have experience with the program and be able to provide direction toward products that have an OESR.  From what I've read, this is a material ingredient disclosure type report, based on ASTM std. E3182-... Read more