Hello Green Gurus,

Here’s a reminder that our first Show & Tell for 2021 is happening next week! Monday, February 1st from 7-8pm ET and Tuesday, February 2nd from 4-5pm ET, come see your peers from all networks present for five minutes each on a variety of topics relating to their work.

This event is connected with the Summit-... Read more

Hello,

Are you aware of any bldg codes that have included requirements related to Material Health?

Thanks!

Mona Lemoine Architect AIBC, MRAIC, LEED AP BD+C, LFA, Regenerative Practitioner, RELi AP

Associate, Senior Sustainability Consultant

Mobile: 236-878-1752
mona.lemoine@stantec.com

Stantec... Read more

Welcome to the quiz portion of "How to Access the Full Power of Biophilia."

Learning Objectives
Upon completing this course, participants will be able to:


Our specification team is currently piloting and testing new software to replace E-specs without an easy favorite, and would really love to know what other firms are using.

First question - what software does your firm use for specifications and why?

Second question - would you/your specifier be willing to chat with ours about it... Read more

I am excited to share with you the final draft of the letter back to LP50 manufacturers.  The LP50 manufacturers sent their “Closing the Loop on Product Transparency” to design firms earlier this year.  For more background information, please check out Chris Hellstern's original August 20th post on this Green Gurus forum.  When we posted the... Read more

Welcome to the quiz portion of LEDs: The Future is Here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Restate the energy efficiency and long service life of LEDs.
2. Describe basic LED components and how, when assembled, they perform differently than traditional light... Read more

Hello,

We are in the very early planning phase of a k-8 public school project to be designed and built in an economically challenged urban location with very limited site options. The project is not LEEDv4 registered yet.  We are at feasibility and costing the soil remediation, needless to say that we would really hope there would be... Read more

Hello Green Gurus!

ILFI’s annual Living Future Conference is coming up, so we thought we might host a (virtual) Show & Tell session of 5-minute versions of peer network members’ presentations like we often do in conjunction with Greenbuild. First we want to see if this is of interest to you all. Please take 30 seconds to let us know... Read more

Hi all,

Due to the eclipse, Nadav and I will be out on our usual call day, April 9th, and we anticipate others may as well. We will be moving the call to Tuesday April 16th at the usual time (2-3pm ET). For this meeting, we'll be holding a whiteboard session about MEP2040, the development of plans to achieve it, and tactics to getting... Read more

The Resilient Outcomes Working Group grew from a session at the 2020 Winter Summit in Gulf Shores AL, and we are still going strong.  We are currently focused on three primary objectives: 1) bringing awareness to resilient design through a presentation at the GreenBuild 2024 Resilience Summit (we'd love to see some peer network friends at our... Read more

Are you or companies considering joining RE100? http://there100.org/going-100

"Companies joining RE100 make a global, public commitment to 100% renewable electricity.

To achieve this goal, they must match 100% of the electricity used across their global operations with electricity produced from renewable sources – biomass (... Read more

Since the launch of the Contractor’s Commitment in late 2020, nineteen companies have become signatories and many others are using the guidelines as a roadmap for their firms.   Now that the pilot year of the Contractor’s Commitment is complete, it is important to consider if and how the guidelines should evolve to be the most impactful.  Over... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Whole-building life-cycle assessment (WBLCA) can help project teams reduce embodied carbon as well as many other environmental impacts of building materials. And it’s incentivized in LEED and... Read more

Team,

See this paper regarding outside air vs. filtration.

https://www.sciencedirect.com/science/article/pii/S0360132313002515

MERV-13 is a good way to get most benefits without a huge cost.

Best,
Luke Leung

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Hi All,

USGBC MA is doing a study on the cost of net zero energy buildings in MA.  I’m wondering if you all have any data to share on plug loads in ZNE projects. I’m looking for single family res, 2-4 unit residential, +/- 60 unit residential, 10-12 story office, and k-12.  The engineers have presented initial results and their... Read more

Hello Green Gurus! 

We are planning a virtual Show & Tell and Happy Hour for Oct. 30th 7pm - 9pm ET (4pm - 6pm PT) with a Halloween theme, bring your best costumes! We will hold presentations (virtually of course!) for about the first 1 hour and 20 minutes and then will transition to some fun Happy Hour festivities, sharing, and... Read more

Folks, would love to hear what software you're for in-house daylighting/energy performance modeling at the SD/DD level. My IT folks have been pushing us to try out Autodesk's Insight again after a not so impressive pilot we did a few years ago. Has it gotten better? Was it us? What programs do you feel good about? Which ones really make you mad... Read more