I'm wondering if people are seeing any increase in WELL or Fitwel certification interest? Or any other 3rd party systems aimed at health and wellness? WELL seems like a higher bar and now WELL v2 offers more flexibility. Is interest and adoption of 3rd party health and wellness certs growing? 

Welcome to the quiz portion of Whole-Building LCA Tools for LEED v4 and v4.1.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Understand the basic goals of whole-building life-cycle assessment, including how it can improve environmental performance and contribute to credit achievement in... Read more

Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

Hi folks,

Here's the next Peer Networks private webinar. As usual, it will be recorded and shared in the network if you can't make it in person:

Thursday, July 18, 2pm EDT (11am PDT)

The Center for Active Design (CfAD), operator of the Fitwel Certification System, recently launched Fitwel v2.1, which advances a vision where... Read more

Fellow SCLers,

This is a small ball item, but I recently had a conversation with a safety glove manufacturer called Traffi. They make PPE, but in particular they have a line of gloves that they promote as carbon neutral. Their organization's operations are offset with retired RECs, but one line of their gloves, LXT, is offset by a... Read more

Dear all,

On a major renovation where the wall R-value/U-value needs to be brought up to energy code, specifically a mass wall situation, does anyone have insights on how the situation is best dealt with? On the project in question for me, the continuous insulation might have to be added to the inside surface of the mass wall and there... Read more

We are cautiously rekindling the age-old debate: how are we balancing modeling software for design /visualization and performance analysis during early phase of design.  

We are heavy SketchUp users for early design, and most of our staff have access to COVE tool for early performance analysis. Problem is, I’d rather use Revit to COVE... Read more

Welcome to the quiz portion of The Death and Rebirth of DC Power. 

Learning Objectives
Upon completing this course, participants will be able to:


Explain when and how to integrate DC power into buildings, and the benefits of doing so.

Understand the history and background of AC and DC power in the U.S.

... Read more

Environmental, social, and governance (ESG) reporting is an increasingly common expectation throughout financial sectors, and the real estate industry is no exception. 

This live webinar with our friend Chris Pyke, Ph.D., a senior vice president... Read more

Some of you saw my 5-minute presentation about the Rich Earth Institute in Brattleboro, Vermont and how it is inventing new ways to keep excess nutrients from urine out of surface waters and use them instead as fertilizer. Now you can also hear about it on Planet Money: https://www.npr.org/sections/money/2018/01/26/581156723/episode-820-p-is... Read more

Hi all,

We're doing some tool-related soul searching at WRNS and some folks here have raised Cove.Tool as a potentially interesting addition to our library. I'm looking for any insight you all can provide. Cove has come up various times, but curious if there's been any change for the better/worse in the past few years.

Do you use... Read more

I received the following email from Naajia at Southface.  I'll be out of town until November 8, but I'll see if there's time for me to address at least the second part before I leave:

A question regarding the BIT-User Forum was brought to my attention by a participant. Apparently when you are posting a question and you pick your location... Read more

Hi all,

We are growing our sustainability group at Flad -- we have a great opportunity to make significant progress as we approach 2030, and we are currently looking for someone to join us in our Madison office. If you know someone who is looking for an entry-level sustainability position, and would enjoy living in Madison, Wisconsin, my... Read more

Hi folks,

The team at Open Architecture Collaborative Canada (website under construction) are developing a remote learning experience to address the lack of meaningful practice of design for social impact in the built environment-related design and planning fields. They’ve together a pretty detailed survey to help guide the development... Read more

Dear all,

A mechanical engineer on a healthcare project we are working on has asked for help in dividing the ventilation calculations between ASHRAE Standards 170 and 62.1; can anyone here help shed some light on it?

"This is the first time I am working on LEED for a hospital and I am not sure how the template wants me to show... Read more

First, special shout out to Carolyn Day from Perkins Eastman for getting permission to use their Pro-zoom account for this Greenbuild wrap-up social session, because...frankly...Greenbuild just wasn't the same without all of you.

So, while we can't be together in person, that doesn't mean we are stuck by ourselves. Grab a refreshment and... Read more

Medium-density fiberboard (MDF), particleboard, and interior-grade plywood can emit formaldehyde, a known human carcinogen. Some materials  come from non-sustainable sources.

BuildingGreen-Approved Panels

Products meet California Air Resources Board (CARB) ultra-low emitting formaldehyde (ULEF) or no-added-... Read more

Hello, 

We are becoming involved with the design/construction of a new k-12 school that is intersted in entertaining geothermal. Does anyone have payback studies on geothermal?

Thanks!