Welcome to the quiz portion of The Four Core Issues to Tackle for Resilient Design (And the Programs That Can Help).

Learning Objectives
Upon completing this course, participants will be able to:


1. Use site-specific hazard analysis to evaluate a project’s resiliency demands.
2. Use climate change data to... Read more

They do, seriously.  They are fine people with tons of information, and without them, all of us Architects would be, well, out of luck.

So, we first want to say THANK YOU to all of our contractor friends who took part in our Contractor Coffee Talk on Tuesday. THAT WAS AWESOME!

We learned things like:

Has anyone used a commercial heat pump water heater for a large protect?  I have found a few manufacturers for this technology, but want to make sure this is a viable and cost approach to electrical eliminate gas on a path to all electric.

Hi Small Firm Sustainable Design Leaders!

Our call today at 1pm Eastern will focus on the ways in which your firm is impacted differently than larger firms on the variety of topics and issues that are reflected in the 2020 SD Leaders Winter Summit REPORT. Take a look at this report and especially at slides 14-33. Bring your observations... Read more

Hello to all,

Are you familiar with examples of commercial kitchens using all induction / all electric cooking, without gas or other fossil fuels?

For a dining hall for 1800 students, we are interested in precedents.

Thanks!

Tamar

What general forums do you want (in addition to the Best Practice forums)? On LEEDuser we have "Forum quick links" in the left sidebar that cover general topics:

https://leeduser.buildinggreen.com/forums

For example, you could have:

and any other category that isn't restricted to a... Read more

Does anyone have a "healthy material" exterior bleacher benchtop (beyond natural wood or metal) recommendation for a public high school track and field? 

How do we discern between fiberglass, recycled plastic or HPDE?  Is there a rule of thumb on how to advocate for specifying a "not as bad" material? 

The project is in a coastal... Read more

We have all these resources out here in the ether but it’s so hard to pull them into one spot! I was asked, last minute to join a client call today to help convince both the client (affordable housing developer) and the mechanical engineers to "stick with" a commitment to 100% electric design that was publicly stated when the competition was... Read more

The results from the "CogFx" study are compelling, showing that people in environments with low VOCs and low ambient CO2 levels score higher on tests of cognitive function.  Specifically, they show that providing 40cfm of outdoor air per (actual live) occupant results in significantly higher scores than even the "Enhanced Ventilation" scheme... Read more

As with most office furniture, systems furniture can be made from unsustainable materials and use adhesives and finishes that emit formaldehyde or other hazardous compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves furnishings that:

Looking for an example or case study for a building utilizing a radiant heating/cooling in climate zone 4a. General use type is office with some public assembly spaces, total of 85,000 sf.

As usual, everyone, especially mechanical engineer, is terrified by the thought of "condensation." So far, I read a DGWW case study, "Energy... Read more

Here is a fundamental question regarding measuring operational carbon emissions that I'm sure many of you can clarify for me:  Let's say you are considering design options and you want to know the relative contribution of GWP of adding an additional inch of continuous insulation to the building envelope.  The GWP from embodied carbon will... Read more

Hi all,

Thanks again to those who presented at the AIA Show & Tell! Here are the slides for some of the fascinating presentations we saw. Please do not share the slides outside of the networks unless they are marked “PUBLIC.”

There may be more to come; if you presented but did not yet provide permission for your slides to be... Read more

Hi All,

My team member is leaving Webcor, and unfortunately that means we have to fill her big shoes with someone new! I thought I'd reachout here and see if you know anyone of high caliber looking for a Sustainability Manager position? Someone with LEED PM experience preferred, and a bit more technical background with MEP/ZNE ideally... Read more

Welcome to the quiz portion of Fundamentals of High-Performance Building Assemblies.

Learning Objectives
Upon completing this course, participants will be able to:


1. Recall how the acronym ENDURE speaks to the unifying aspect of high-performance buildings.
2. Describe how to apply the principles of high-... Read more

Hi all,

We are looking to study Passive House on a couple small multifamily projects. Our understanding is that WUFI Passive only integrates with SketchUp at this time. Our BIM manager has been trying to find an example of a firm that works in Revit and uses WUFI Passive, to point him in the right direction on workflow. I offered to ask... Read more