THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Why high-performance assemblies? And why now? Today we demand better thermal performance from our building assemblies than ever. But higher performance... Read more

Welcome to the quiz portion of Boost Happiness and Save Energy with Adaptive Thermal Comfort!

Learning Objectives
Upon completing this course, participants will be able to:


Define “adaptive thermal comfort” and explain how it can contribute to occupant health and satisfaction.

Compare the adaptive comfort model... Read more

Hi all,

We're seeing more interest and desire for outdoor work spaces, and as we consider the design implications around working outdoors, teams have been asking about wind comfort. We've tested Ingrid Cloud and now SimScale. I'm curious if anyone would recommend any other CFD tools that are geared toward architects? Also curious if... Read more

Folks, would love to hear what software you're for in-house daylighting/energy performance modeling at the SD/DD level. My IT folks have been pushing us to try out Autodesk's Insight again after a not so impressive pilot we did a few years ago. Has it gotten better? Was it us? What programs do you feel good about? Which ones really make you mad... Read more

I'm exploring the use of phase change material for a project. Specifically, looking at the BioPCM/ENRG Blanket product. I see on their website that ZGF used it at University of Washington. I'd love to hear any feedback from folks who have used it, and more specifically how your energy model and MEP engineer accounted for it. Thanks!! https://... Read more

I'm the Director of Sustainability at Columbia Construction.  We're headquartered in the Boston area and primarily work in the Northeast.  Along with the typical challenges of projects and evolving rating systems, I'm looking forward to learning and sharing strategies for corporate sustainability progress.

This past year I'm proud to... Read more

Hi everyone, 

Thank you so much to the SDL members who attended the Summer 2023 Summit! We had an amazing time with you there. A big thanks as well to the attendees who shared 5-minute presentations during the summit.

Below are some of the slides for the presentations. Please note that we have permission from all of these... Read more

Hi all -

I got this yesterday from Renew Oregon, a credible environmental NGO here in the state.

"A secretive special interest group has filed a petition at the Federal Energy Regulatory Commission (FERC) to take “net metering” rules away from states and make it a federal issue.  Net metering is the program that allows homes and... Read more

In an effort to share expert knowledge on the topic of whole building LCA, we are continuing our expert guest webinar series, addressing the topic of steel on March 19th at 1PM EDT. Michael Gryniuk PE, with LeMessurier and SE 2050, will be joining us to share his strategies for reducing the embodied carbon of steel. This webinar is particularly... Read more

Hi All,

As of February 1, I’ll no longer be on this Forum as I don’t fit into any of the roles of SDL (yet) and I respect this space as a haven for those who do.  Helping to form this network with Nellie, Jim and Nadav has been a highlight of my career. Its truly exciting to see SDL networks finally expand to other practice areas.  I am... Read more

There are a number of SDL and other peer network folks talking about a potential casual meet up in association with Living Future 24 (next week in ATL).

In the interest of Julie McCoy-ing this thing into being ... 

Who: All y'all ... any Peer Network folks who are in town for LF24 (or local to ATL). 

Why: Connecting is... Read more

Our building scientist has been using Insight 360 to model daylight and document it for LEED certifications.  However, it appears that Autodesk is no longer fully supporting the tool and may eventually stop all together.  (we have not been able to run simulations for weeks due to a change to how "cloud credits" work on their end that they... Read more

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

test

Not sure if anyone is currently looking to hire someone, but I wanted to pass along info on Bohan Zhang in case anyone might be interested.  Bohan recently graduated from the GSD's MDes Energy and Environment program.  He also has an MArch degree, and I know took a number of courses in Real Estate and Finance at both MIT and Harvard.  I had him... Read more

The headlines are everywhere—from heat waves in Europe to wildfires in the Western U.S. to tropical cyclone flooding in Australia. In this age of climate change, just as there’s an urgent need to reduce carbon emissions and other greenhouse gasses, we also need to adapt and invest in resilience.

Increasingly, owners are asking for risk... Read more