Good morning, All,

Just a bit of news this morning.  My family and I are moving back out west!  I am continuing in my current role with EwingCole, but will be doing so from Portland, Oregon.  Although North Carolina has a been a wonderful place for us for the past 13 years, it is time to be close to family in the northwest and southwest... Read more

Hi all,

We have a newly constructed, core/shell project having some hot water issues in the core restrooms.

There is a 0.35 Toto lav installed throughout. The hot water heaters are adjacent on each floor, located in the janitor closets. We did the math, and there could be a gallon of water standing and cooling in the pipe between... Read more

For those of you that don't know me, I'm the Director of Sustainability at the Structure Tone organization. Betting that you can guess what my role entails since you're all in similar roles and we've done the introductions a couple of times in different forums...given that I'd like to introduce myself personally.

I live in a suburb of... Read more

Welcome to the quiz portion of The Four Core Issues to Tackle for Resilient Design (And the Programs That Can Help).

Learning Objectives
Upon completing this course, participants will be able to:


1. Use site-specific hazard analysis to evaluate a project’s resiliency demands.
2. Use climate change data to... Read more

Hello all,

This month's SCDL call was full of great discussion! We decided this month that we are feeling good about where we are for the Task Force Agreement on defining social sustainabiltiy in our work. The aim is to work with this agreement for a while and see if it holds up as a process framework. There was also interest to invite... Read more

Hi there SD Leaders,

We're running an LCA on one of our projects that's about to start construction that has had serious embodied carbon goals and I got a result that really surprised me. I haven't been able to find any obvious/glaring issues with the work, but these results are strange enough that I'm not feeling confident. I'm hoping... Read more

Does anyone up here do or have familiarity with anyone who regularly does NEPA EIS? If you need a definition for the acronym, please see here: https://www.epa.gov/nepa/national-environmental-policy-act-review-process#EIS. I've been asked if I know anything about it, to which the answer is no, but I'd like to get smarter about it and I'm hoping... Read more

Hi everyone - we have a new higher ed client who is committed to sustainability but not very knowledgeable about current topics such as carbon (both embodied and operational) or the electrification of buildings.  I need to educate them and would like to start with some easily-digestible background reading.  But as we all know, we're a bit dorky... Read more

I don't have any direct affiliation with this role other than a former colleague asked if I would share the job posting for Director of Sustainability at Corgan with my network - that's you! She provided a little more context - they are obviously looking for someone with sustainability experience but are open to an up-and-comer who would be... Read more

I wanted to let you all know about this Built Environment Plus Roundtable coming up on Thursday afternoon 3:00 est. We will be having a discussion around the IRA and how to implement the incentives on projects and help our clients understnad what it means for them. This is an informal setting where people can ask questions or share experiences... Read more

I wanted to post a reminder for you all that the Sustainable Design Leaders Summit will be kicking off with a Pre-Summit workshop in Seattle July 31st, 9am - 3pm. If you are interested in joining your peers for this workshop, please see the registration link below. Also, if you know someone in the Seattle area that would be good to have in the... Read more

Wood decking requires potentially hazardous preservatives and stains, and plastic waste is a significant environmental problem.

BuildingGreen-Approved Decking

Composite decking approved by BuildingGreen has at least 50% total recycled content. For plastic decking, post-consumer content has to be greater than 50%.

Health and... Read more

Love the profile of Anica as the "featured member" on AIA's website--congratulations, Anica!

It's great to see the "just do it" attitude to achieving the 2030 goals: "We do not rely on clients to tell us to design a high-performance building; we are going to do it anyway, it's our job."

Andrea first became familiar with BuildingGreen in 2010 when she and her husband moved to Vermont and built their own passive house from the ground up. BuildingGreen’s president Nadav Malin heard about the project and asked if the staff could take a tour, and the rest is history. She joined the BuildingGreen team part-time in 2011 to work on... Read more

Overland Partners is looking for a Sustainable Design Analyst with 2+ years of experience working with teams to implement sustainability strategies and building performance simulation. 

More details here: https://www.overlandpartners.com/careers/sustainable-design-analyst/ Please pass along if you know of someone who may be a good fit... Read more

Greetings,

I posted this a while back on the MEP SDL forum but also wanted to appeal to the broader community.  We need help gathering existing plug/process load data.  We know it is out there!  Two golden stars to Becky Alexander from LHB who reached out to us after this month's meet-up with some useful material.  We need more!  Please... Read more

Hello! 

We have several projects that are either pending ILFI Zero Carbon certification or the owner is planning to purchase offsets to cover construction emissions. Thus far, I have not considered this in our corporate footprint reporting. However, we are including A5 emissions whenever feasible and multiplying that performance over the... Read more

Hello all, 

Wondering if anyone has experience with lead limits in electrical cable and wiring? 

LEED for Healthcare allows a limit of 300 ppm of lead in electrical wire and cabling - my search for compliant products has been all dead ends. (MRc PBT Source Reduction - lead, cadmium, and copper)

Acceptable regulations for... Read more