Is anyone aware of research or guidance that has looked at VOC’s from roofing products and ventilation intakes? I’ve done some searching, and focus is mainly on managing the construction process to reduce installer exposure. 

Thanks for any help!

Tate

Plug loads—the energy consumed by plugged-in devices—can use a substantial amount of the total energy in both residential and commercial buildings.

BuildingGreen-Approved Controls

BuildingGreen approves products that monitor and reduce electricity use for plugged-in electrical devices.

Plug Loads and Energy Conservation... Read more

Huge shout out to Patty Lloyd, Luke Leung, Janet Olsen, and Sarah Gudeman for their webinar on the Power of Peer Networks. They share lots of insights into the value of participating in BG Peer Networks and many others. Ten bucks to Illinois Green gets you access to the recording--I loved it. What would you have said that they didn't?

Welcome to the quiz portion of Design Strategies for Occupant Engagement—and Why They Boost Performance.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Explain how research in the social sciences and neurology links occupant engagement strategies with specific sustainability... Read more

Hi folks! Our AIA Seattle Committee on the Environment is hosting a series of decarbonization talks that might be of interest to this group. The next one is coming up next Thursday with the University of Washington. 

Details and free registration here: https://aiaseattle.org/event/cote-university-of-washingtons-pathway-to-d...

Hi all, curious if anyone is involved with development / advocacy for the new MA stretch code? https://www.mass.gov/info-details/stretch-energy-code-development-2022 

My firm recently added a Boston location & I'm slowly getting to know the green building world there - would love to know if anyone is organizing public comments on the... Read more

In our quest to create a low carbon future the lectrification/Decarbonization working group is planning spend the next 10 months creating tools to advocate for electrification:

How to create a grid that works for our electric future. How to electrify buildings, both existing and new. How to advocate for policies and legislation that... Read more

SDL Show & Tell in Chicago, Tuesday, November 13 from 7-9:30 PM (CST)
HKS | 125 S Clark Street | Chicago, IL 60603

What better way to kick off your time at Greenbuild than with snap previews of the best sessions? The Sustainable Design Leaders Show & Tell is back, brought to you by BuildingGreen and HKS! This event is by... Read more

Does anyone here have a draft spec for low embodied carbon concrete they could share? I see the GSA has a standards sheet with MGWP limits, but we are hoping to actually specify the mix for upcoming projects.

This is specifically to Chris but also to anybody who is interested in the topic - which Chris raised on our SAL call today, regarding how to influence change:

From this article, which i thought was good but had a great paragraph pulled below.

https://www.nytimes.com/2020/02/12/business/Steve-Mollenkopf-Qualcomm-corner-office.html... Read more

Hi all,

I had a position listed for a Sustainable Design Coordinator which we have down for the moment as we've taken on a fall intern instead. In the interim, however, I did have a couple of great candidates that I'd like to help find good matches. One of those candidates is Marissa Lantieri, see her resume and portolio attached.

... Read more

Successfully managing the LEED documentation process requires specific knowledge, tools, and skills that are not covered in the LEED Reference Manual. This CEU course is based on the LEED Project Management course that GreenStep developed and teaches through UC–Berkeley Extension. It is designed for professionals who are somewhat familiar... Read more

Colleagues,

As we all know, ventilation rates must be kept the same between the LEED Baseline and proposed energy models. However, we're aware of projects that have been able to claim energy savings associated to reducing ventilation using systems like Aircuity. 

Have any of you successfully claimed credit for reduced airflow due... Read more

Hello everyone!

The Sustainable Design Leaders Summit will be kicking off with a Pre-Summit workshop in Seattle July 31st, 9am - 3pm. If you are interested in joining your peers for this workshop, please see the registration link below. Also, if you know someone in the Seattle area that would be good to have in the workshop and might be... Read more

My apologies if I posted this question twice ont he forum - I am a newbie on this forum.

Anyone knows how to import an structural emobdied carbon project file into architectural project file of the same proejct to generate a combined Sankey graph?  My Building Transparency/CLF contacts haven't got back to me for a week now...

... Read more

Has anyone used Insight for Revit to document the LEED Daylight Credit If so, would you recommend it?

Thanks,

_Ilana