At the recent All Networks Workshop in Seattle, I listened with interest to some conversation about including sustainability goals, KPI's, critical materials lists, and other related topics on a G-sheet in the drawing set.  This is something I had not previously considered, but would like to learn more about. 

If you work for a design... Read more

Welcome to the quiz portion of Three Imperatives to Create the Future of Green Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain why it's relevant to teach cross-disciplinary skills in the green building industry.
2. Detail the reasons for encouraging... Read more

test

What is the status of the roof insulation market regarding non-halogen containing polyiso boards? I know GAF and Atlas still have them. I thought JM had them as well, but seems to have taken them off the menu. Are there performance issues?

I'm working with the AIA Minneapolis chapter on guidance for small firms related to how and when to energy model. A lot of small firms would like to sign the AIA 2030 Commitment (we had 100 in a room in 2022 in a session led by Nadav and Gwen Fuertes). But we have learned that a) they don't have a good way to energy model small commercial to... Read more

A site license allows your entire organization to access and share the report, and to keep a copy in your library. The site license does not allow multiple users to earn CEUs. If multiple individuals in your organization would like to earn CEUs from this report, please purchase individual copies.

The world’s most... Read more

Furnaces heat air that is then distributed through ducting and warm-air registers.

Approved by BuildingGreen

Products approved by BuildingGreen include the highest-efficiency, sealed-combustion furnaces and high-efficiency wood or multi-fuel furnaces. A multi-fuel furnace uses several sources of energy such as wood, wood-pellets,... Read more

Does anyone have a spreadsheet or chart that compares the new Fitwel v2.1 with Fitwel v2.0 ?

I can't seem to find such a thing on the Fitwel website.

I am trying to determine which version-route to take on our "Workplace" project.

Or do you have experience in this that you can relay?

Thanks.

Hi All,

The SMEPL's Embodied Carbon committee has been hard at work developing a letter that calls for MEP equipment vendors to increase material transparency in their products.  As a way of contacting the most widely-used vendors first, we're asking each of you to enter your "Top 3" specified vendors for each of the products listed in... Read more

Hi everyone,

Will you be attending the Living Future 2023 conference, or do you live near the DC area?

If so, you’re invited to join us for an informal meetup!

When: Wednesday May 3, 2023, 7:30-9pm ET

Where: SmithGroup, 1700 New York Avenue, NW, Suite 100, Washington DC

If you plan on coming, please be sure to... Read more

***Cross-posting this from SCL Group***

Last year I was approached by Green Advantage, remember them from like 2005? There has been a LEED innovation credit for as long as I can remember.

Has anyone seen employed Green Advantage recently? Is anyone asking for it?

Do you see value in GCs/CMs/trades having this training... Read more

Hi folks,

As you've no doubt heard from us by now (several times), in lieu of Summer Summits this year we're offering a combination of events this fall. Our series kicked off last week with a great Regional Mini-Summit in Boston. Regional events like this were in our plans before COVID blew everything up, so this one was a long-time... Read more

We are having trouble sourcing a LEED compliant wallcovering adhesive. We specified Roman Pro-880 which is low VOC but doesn't have sufficient back up for TVOCs. Have you had success with other products?

Greetings from the CARE Tool Team,

We are thrilled to update you on the successful soft launch of the CARE Tool last week at Greenbuild! The online beta was unveiled at a reception hosted by EHDD, AIA COTE, and Architecture 2030 to 300+ people, where attendees got the chance to learn about and explore the tool in a demo room. We... Read more

Hey SDL,

I'm curious if anybody out there has developed specification language requiring a certain level of airtightness (as assessed via one or a series of blower door tests) for a commercial project when it is not going for a Passive House certification and a blower door test is not required by code--basically, something in the... Read more

Welcome to the quiz portion of The Sound of Sustainability: Acoustics in High-Performance Design!

Learning Objectives
Upon completing this course, participants will be able to:


Describe how increased acoustic performance benefits indoor environmental quality (IEQ).

Recount the negative impacts of poor acoustic... Read more

The Minnesota CLF chapter’s Specification Subgroup (myself, Andy Marolt/Ryan Companies, Laura Eder/ESG, Java Nyamjav/MSR Design, with input from Annie Perkins/SFI) recently collaborated on a draft set of specification templates incorporating embodied carbon requirements into product performance and action submittals. This work builds on sample... Read more