The overwhelming majority of wallcoverings are flexible vinyl, laden with all the life-cycle concerns that come with PVC. Products used to contain orthophthalate plasticizers—which make up a large percentage of these products. Phthalates are not bound in the material and can slough off in dust, exposing occupants during everyday work or play.... Read more

This is deep nerdy stuff, so don't say you haven't been warned.  ASHRAE has opened the first public review to its net zero standard (228).  Here's the blurb:

Standard Method for Evaluating Zero Net Energy and Zero Net Carbon Building Performance ASHRAE Standard 228-202x sets requirements for evaluating whether a building or group of... Read more

The Sustainable Construction Leaders peer network brings together the most committed sustainability directors from leading construction companies throughout the U.S. and Canada. We invite you to apply for membership.

Hi SDLers: See the great opportunity to weigh in on the 5th National Climate Assessment at a series of workshops in early 2022. 

Register here:

https://www.globalchange.gov/content/nca5-engagement-workshops?utm_sourc...

Hope all are staying well.

Mary Ann

Hello Sustainable Design Leaders!

Here are the details for an upcoming SDL Peer Network web call, this webinar will be a call to share research and resources around mass timber. Hope to see you there!
REGISTER HERE!

Embodied Carbon and Mass Timber – a shared learning conversation
March 31st, 2020
3pm - 4pm ET (... Read more

Looking for 2-more flushometer style dual-flush flush valves to put in a public project spec alongside sloan uppercut and cannot seem to  find any.  Does anyone have any that they have used?

Thanks in advance!

Hi Folks - 

The "request for participation" email below is from Brendan Owens, who most of you know was at the USGBC for over 18 years, and is now the Chief Sustainability Officer for the US Dept of Defense. As I read the text, I couldn't help but think of this group as a deep well of expertise and experience that could undoubtedly help... Read more

We are working on a Core & Shell project with a developer that we work with frequently. I'm looking for advice on best approaches to achieving the Whole Building Life Cycle Assessment credit- we haven't used TALLY and done this type of analysis before. What are some approaches to achieving this credit that others have found successful? I... Read more

I’m a volunteer member of the ASHRAE 209 ("Energy Simulation Aided Design for Buildings Except Low-Rise Residential Buildings”) Committee.  Are you familiar with ASHRAE 209? It was first published in 2018, and it outlines a process for incorporating energy modeling into the design process. 

From the forward: 

 ASHRAE Standard 209... Read more

We're now mid-way through Summer Summit season! One of the “good problem to have” challenges we’ve had at recent SDL Summits has been too many great five-minute presentations. It’s hard to find time for them all. This year, since we’ll be online anyway, we can get a jump on that by starting the five-minute presentations early in addition to... Read more

Ada Fran Maman

Hello! We are currently working on an LBC Petal project pursuing the Materials Petal. Does anyone know whether H1 lubricants are inherently Red List Free given they are food grade lubricants? We are trying to figure out whether NSF H1 registered lubricants need ingredient reporting or whether the NSF registration works similar to Delcare, RoHS... Read more

Hi everyone,

Thanks so much to those who attended and shared at the Greenbuild 2024 Show & Tell! As always, we had a riveting lineup of presentations.

The slides for the presentations are below. We have permission from all of the following presenters to share the slides within Peer Networks-only spaces, but only the slides... Read more

Can anyone point me to a (dream?) resource listing effective R-values of various wall assemblies?  We are trying to find a cost-effective R-40 wall assembly for a one and two story public middle school targeting net zero energy in Oregon.  Referencing Seonhee's "thermal bridging" thread in late April, I used Therm's native drawing feature, but... Read more

Welcome to the quiz portion of Finding Products for LEED v4—A Guide

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe ways in which the LCA approach is gaining ground in LEED v4 and how the transition is reinforced by manufacturer transparency and disclosure.
2.... Read more

Hello Green Gurus,

I wanted to take a moment and introduce myself as I am new to the group. My name is Tim Pranaitis and I am the co-chair of the newly-reformed sustainability committee at Steffian Bradley Architects in Boston, MA. As a newer member of my firm, I have been tasked to re-start and grow our sustainability committee which... Read more

Conventional heating systems burn fossil fuels on the building site or use outrageous amounts of electricity.

BuildingGreen-Approved Heat Pumps

The best heat pumps solve both these problems and provide efficient cooling. BuildingGreen approves air-source heat pumps with minimum HSPF and SEER levels of 10 and 20, respectively.... Read more