Hi folks,

No details have been sorted out yet, but I wanted everyone to have a heads-up that the SCL Steering Group is proposing that we graduate to a full, stand-alone SCL Summit in 2020. (Until now we’ve been squeezing our Summit into the day before Greenbuild, which is good in some ways, but problematic in others—and limits our time... Read more

This article just came up in my news feed. I thought you’d all like to read it. I will point out that C&D-specific MRFs have told me that they are really good at single-stream C & D waste, as long as the drywall is pulled out.  Any drywall in a single-stream C & D dumpster ends up in the landfill. Drywall just breaks apart and gets... Read more

Protection against corrosion is the primary function of steel coatings, which often contain corrosion inhibitors, volatile solvents, heavy metals, and other hazardous chemicals.

These coatings are specified when steel is used structurally, outdoors, or in high-use areas. In these situations, hazardous coatings are often applied off-site... Read more

Jenny/Dan:

What types of content do anticipate having in the Documentation Toolkit tab? Here's an example of what we have on LEEDuser:

https://leeduser.buildinggreen.com/credit/EBOM-2009/SSc5#tab-docs (login required)

The layout is a little complicated on LEEDuser, since we had to work with a lot of legacy content, but... Read more

Following up on the Decarbonizing Existing Building: Envelope + MEP Solutions Integrative Design Jam, a cohort of us determined a "Decision Making Tree Toolkit" that begins to classify decisions into and "if/then" framework using region, market, climate, scale of intervention, and other factors would be useful in helping us collectively move... Read more

Hi there colleagues!

Out of curiosity, do you plan on attending Greenbuild in person in San Diego in September? My staff asked me if we were going and my answer is partially contingent on the extent to which attending would mean getting to see some of our favorite people (read: all of you). Looking forward to taking the temperature of... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

Tamela Olp Jun