Want to make sure those in Portland are aware of a couple of LF18 Ramp-Up Events happening on April 10th. 

Introduction to the Living Building Challenge (presented by Kathleen Smith)
https://living-future.org/events/introduction-to-the-living-building-challenge/

Incentivizing Living Buildings in Portland 
https://... Read more

SERA Architects is pleased to invite you to join a discussion with Paul Hawken about his new book, "Regeneration".
Kira Gould and I will be the hosts on September 28, at 3:00 PM Pacific Time.

Please register in advance for this free event with this link:
https://lnkd.in/gCMY4TTn
 

A new article addressing whether PFAS finishes on upholstery fabric actually work (Spoiler alert - they don't) has been published and can be found here:

https://journals.sagepub.com/doi/10.1177/24723444231159856

This is authored by the fine folks at Green Science Policy, Arlene Blum's group that is the source of the Six Classes of... Read more

Has anyone done any museums in which they hired an independent QA/QC specialist? Or perhaps, your firm offers QA/QC services and experise in this area? If so, could you please reach out to me? I'm wondering what firm you used and what your experience was. Was it worth the fee?

Hi SDL: I'm working on a presentation and would love to highlight a completed and/or unbuilt project that seriously incorporates climate change projections in the design. Any scale would be great. It's becoming abundantly clear that we need to be doing this for any building that will be around for even a few decades. In fact, the insurance... Read more

Dear Sustainability Leaders,

During this time of shifting our lives and work to online, BuildingGreen is working quickly to assess the challenges and opportunities regarding the remaining Peer Network Summits for 2020. As timelines continue to be extended for social distancing (and virtually connecting!), we are mapping out the... Read more

The Minnesota CLF chapter’s Specification Subgroup (myself, Andy Marolt/Ryan Companies, Laura Eder/ESG, Java Nyamjav/MSR Design, with input from Annie Perkins/SFI) recently collaborated on a draft set of specification templates incorporating embodied carbon requirements into product performance and action submittals. This work builds on sample... Read more

Hello all,

I have a quick question for you. While Energy Star appliances are a no-brainer for projects, I don't see a hard requirement to select Energy Star appliances in the energy prereq/credit. There are references in the water section for water using appliances like ice machines, dishwashers, clothes washers, etc., but no related... Read more

Welcome to the quiz portion of Go with the Flows: The Promise and Peril of Hygrothermal Modeling

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe the true role of hygrothermal modeling in design.
2. Name four instances in which to consider using hygrothermal modeling... Read more

Hi all,

We’re thrilled to share that registration is now open for our All-Networks Workshop on Integrated Design + Delivery from the Inside Out! The workshop will be held on July 15th at Miller Hull’s Seattle office, right before the Summer 2024 SDL Summit. Register now before it fills up, and please feel free to email me with any... Read more

This just in from AIA Leadership:

https://www.aia.org/pages/6522198-aia-statement-on-scotus-decision-in-west-v

Please share this with your networks.

Thanks.

Mary Ann

The BuildingGreen/GreenStep exam prep materials are... Read more

Wondering if anyone has a contact for good [sustainable] interactive water feature designer? A client is looking for a designer to add to our team and I figured this network would certainly have some insights. Project will be located in Omaha, NE. 

Welcome to the quiz portion of The Building Envelope: Primers from Environmental Building News.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how thermal mass helps maintain indoor thermal comfort in buildings.
2. Describe the differences between closed-cell and... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Vapor retarders are meant to protect our building assemblies from getting wet, but they can also slow drying, contributing to mold and structural degradation.

BuildingGreen-Approved Vapor Retarders

Hello - I wanted to see if others have been having any of the same Windows security issues with a host of public software (Radiance, Window, DAYSIM, Open Studio) that we regularly use for performance analysis.

My IT team has let me know that they see serious security conflicts with THERM, as well as lot of the LBNL software (Radiance,... Read more