Hello - I have met several of you virtually over the last couple years. My name is Megan Zack and I am excited to share that I have changed positions and will be the Cheif Sustainabilty Officer at Wight & Company. After spending the last 20 years working as an architect with a small percentage of my time dedicated to sustainabilty, I'll be... Read more

Shane, please confirm that there is a meeting this Friday (4/6) and if the time is 3:00 ET. We plan to have at least one member from our team there. Also, please forward the links/numbers for joining the meeting.

It would be helpful to know any questions you have ahead of time (if possible) so we can bring answers and what portion of... Read more

Board insulation has good thermal performance ranging from about R-4 to R-8 and is used as an integral part of a building envelope’s continuous insulation system.

Because board insulation is used on the building exterior, it is not always subject to the same material health and emissions requirements as batt insulation used inside the... Read more

Hi everyone, 

Following November's SCL Summit, I put together a model Construction Waste Management Action Plan based on the ideas shared in our focus group. It is linked below in Google docs, so everyone should have access to live edit the plan. Please take a look and add comments if you can. It's a very rough outline, so we can... Read more

Hi SDL!

Our CM recently offered up the possibility of substituting Pozzotive into our structural and paving concrete mix (www.pozzotive.com) on a large public building. Apparently it is on a level with the cost of standard cement.
We are eager to reduce the project's embodied carbon, and this seems almost too good to be true.

SDL

Glad to see some of you at the COTE event at our studio last week.

Has anybody heard of this company and technology? https://www.enverid.com

Thanks in advance, Zach

Zach Craun, WELL AP, LEED GA

Associate

COOKFOX ARCHITECTS, DPC

250 West 57th Street

New York, NY 10107

... Read more

I'm hoping someone knows the anser to this question. For the LEED ND certification the minimum requirement is "The LEED project should contain at least two habitable buildings and be no larger than 1500 acres." Does habitable mean buildings with dwelling units?

Hi Green Friends - I hesitated to post on April Fools, but wanted to get the link out for folks to share with their netowrks    I'll be teaching a workshop at the Pacific Energy Center on May 11 on Electrification Retrofits of Exisitng Non-Residential Buildings.  I'll be bulidng on the great work our sub-committee led by Allison has been... Read more

Hello. Has anyone tackled "tracking emissions from all company-purchased cloud computing" yet? This is in the best category for CC 2.0 and wanted to ask.

How "deep" did you go? 

This was an interesting read, but still left me a little confused about how far I need to go and even what questions to ask:   

https://medium.com/... Read more

Welcome to the quiz portion of Energy Modeling: Early and Often.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how energy codes and standards are pushing commercial projects beyond what they can do without modeling.
2. Describe the energy and cost-savings benefits... Read more

Hi, all.

Has anyone used Unicel's Timber Curtain Wall System? It uses engineered glulam wood mullions on the inside with aluminum mullion caps / butt joints. Has anyone gotten close to using it, but couldn't get it procured for a particular reason? They note up to 72% more energy efficienct than a conventional aluminum curtain wall and... Read more

Per our discussion on today's SMEP call, it would be interesting to have a more in-depth discussion on Indoor Air Quality. Questions I have personally...

Hi friends, 

Before i forget, here is the checklist I mentioned yesterday that got such a positive response in our office - again it came about after i was asked (for the Nth time) to write a sustainability description for a concept proposal/ RFP that I was not a part of and frankly didn't have a lot going for it. So it's framed as "you... Read more

I was recently asked if there is a way to quantify financially what one MT eCO2 might be worth in the context of a building owner reducing their own carbon emissions.  How do you put a dollar value on those reductions?  Does anyone have experience with that or can you point me to the correct resource to answer this question?

Hi all,

I am working on a Div 01 sustainability spec section for our firm to include by default on all projects. I've been finding a lot of great sample language out there for embodied carbon measures and material transparency (huge thanks to anyone here who had a part in developing those resources). 

One thing I'd like to include... Read more