Hello all,

We are having a mini office debate on fiberglass vs aluminum windows for use in schools (k-12) in Massachusetts. In the past we have always used aluminum windows on our schools, for durability. However, their performance is not as great as other products that are up and coming on the market. There is some hesitation to switch... Read more

ASHRAE 209 in all its glory has been uploaded. This will impact our architectural process, for better or worse, so we should embrace it and learn from it. The revised AIA Energy Modeling Design Guide (due out next year) has been timed to correspond roughly to 209 coming out and will include references to it. The first few energy modeling '... Read more

Currently not for sale, being updated and re-released in November 2021.

New Guide to Thermal Insulation Report

The BuildingGreen Guide to Insulation provides detailed guidance on insulation products and practices, including cost comparisons and detailed recommendations on what insulation to use, and what to avoid. It's a treasure... Read more

I'm curious if anyone can share their strategy on indoor air quality for the return to office. Is this something that is prioritized at your firm from a wellbeing standpoint and with the current health crisis at hand? Lendlease is looking into options to safeguard our employees/occupants as we move back into the workplace and I'm researching... Read more

There are a number of clear finish options available, from natural oils and low-toxicity products primarily used on residential woodwork through factory-applied finishes where specific aesthetics and/or added durability are required (such as those used on cabinetry or commercial architectural millwork). Many of these have very high VOC levels,... Read more

Are you a design or building professional who wants to learn more about sustainability—such as how to do energy modeling, improve the building envelope, or use renewables on a project? Now more than ever, it's time to join the sustainable... Read more

(posting here for Kira)

Sustainable Design Leaders:

Is your firm using the AIA COTE Top Ten Toolkit in some fashion? COTE would like to hear from you, especially if you are willing to share your story. 

Specifically, we'd like to share best practices and lessons about how it is working (with certain types of projects, at... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Vapor retarders are meant to protect our building assemblies from getting wet, but they can also slow drying, contributing to mold and structural degradation.

BuildingGreen-Approved Vapor Retarders

Welcome to the quiz portion of LEED vs. Green Globes: What's the Difference? (recorded webcast)

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how LEED and Green Globes in turn approach key credit requirements.
2. Describe differences between LEED and Green Globes... Read more

All--

A few months ago, I sent around a note about an article I was writing about the state of post-occupancy studies. It finally came out, in the latest issue of Metropolis. Great quotes and work from Payette, EDR, KieranTimberlake, HKS, and others. Thanks to all for helping with this.

I don't believe it's available online yet,... Read more

Hi,

We have a market-rate housing highrise project that is going through VE right now: we need cheaper/lighter rainscreen claddings than precast concrete or GFRC.

If you've gone through this similar exercise, I would greatly appreciate recommendations for cladding manufacturers/products with EPDs available. We are open to metal... Read more

Hello Sustainable Design Leaders,

On October 5th a number of us gathered for the Fall 2021 SDL Virtual Summit and the BuildingGreen team is happy to now share with you all the event report here! 

This report can be shared publicly. If you think someone would like to see it, such as firm leadership or prospective Peer Networks... Read more

Reaching out to the collective knowledge here.  With interest in circular economy and building reuse growing, is anyone leading the charge for the concept of building reuse as a tool for maintaining community identity?  Has anyone seen successful projects with this concept in mind?  I was just in a discussion with a bunch of SDLers, and while... Read more

I'm looking to change consultants. Let me know if you have worked with a 179D consultant that you would recommend.

Hi All,

Wanted to let you all know about an ADSDL inspired event we are having on Thursday in Boston.  We’re having close to 40 presenters giving 5 minute presentations (sound familiar?) on the latest and greatest strategies getting us to net positive energy buildings.

Please forward this on to folks in your Boston offices.  ... Read more

Happy Friday Everyone!

Hoping to add a bit of excitement to the end of your week: 

Here is the Sustainable Design Leaders 2020 Summer Summit Report. 

Enjoy!

RoseAnn for Nadav, Candace, and the BuildingGreen team

Hi gang,

Following up on the recent Air Quality Design Jam at the summit, I’d like to round up the folks interested in supporting an Air Quality Working Group.

Didn’t attend the summit? No worries – everyone is welcome! We had a good group the other week and several of us want to continue the conversation.

The design jam... Read more

test