This came up a number of times at the SDL Tempe Summit so I thought I would share. If you have not already I highly recommend this recent research paper from the UW-IDL on the tradeoffs of operational and embodied carbon in envelope design in different climates. As a Passive House nerd it made me question the super-insulated envelope at least... Read more

Hello Sustainable Design Leaders!

Here are the details for an upcoming SDL Peer Network web call, this webinar will be a call to share research and resources around mass timber. Hope to see you there!
REGISTER HERE!

Embodied Carbon and Mass Timber – a shared learning conversation
March 31st, 2020
3pm - 4pm ET (... Read more

Welcome to the quiz portion of Dream Materials: What Do You Really Want to Build With?

Learning Objectives
Upon completing this course, participants will be able to:


1. Differentiate the tools that encourage accountable design.
2. Identify materials that are hazardous and list certifications that optimize for... Read more

Love books? Want some inspiration? Join this Goodreads group with the following link... 

https://www.goodreads.com/group/invite/873351-green-gurus-goodreads-grou... (this link will be active for 30 days so let me know if you get here late and need it again)

I set this up as "private" so I will need to approve you. Anyone will be... Read more

Hello - I seem to remember a thread on Sustainable Design Specialist / Advisor - Focused or Integrated Position within a firm. Does anyone remember the subject header or did I just dream this up? My searches are coming up empty...

Thanks!

Mona

Mona Lemoine, Architect AIBC, MAA, MRAIC, LFA, LEED AP BD + C

Senior... Read more

Hi there colleagues!

Out of curiosity, do you plan on attending Greenbuild in person in San Diego in September? My staff asked me if we were going and my answer is partially contingent on the extent to which attending would mean getting to see some of our favorite people (read: all of you). Looking forward to taking the temperature of... Read more

Fluid-applied flooring (FAF), or resinous flooring, is made from various hazardous chemicals that can be released into the building, especially during application.

BuildingGreen-Approved Flooring

BuildingGreen selects FAF that meets CARB emissions standards AND either contains recycled content or offers other positive... Read more

Anne Hicks Harney, FAIA, has more than 30 years of experience, focusing on high-quality design imbued with a solid technical and sustainable foundation. At Long Green Specs, she provides sustainability-focused construction specifications and building material expertise to architectural firms across the country. She was chair of the AIA... Read more

This just in from Berkeley Earth. The definitive report on 2023 global temperatures. Lots of incredible graphs to peruse but the news is pretty incredible. Actual temperatures far surpassed predictions. "At the start of 2023, we foresaw only a 14% chance that 2023 would become a record warm year, and only a ~1% chance that 2023 would reach 1.5... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

To piggyback off Nathan's introduction where he mentions construction waste management, who is doing anything innovative or different in managing construction waste?  Construction waste has not historically been a passion of mine, but now working in sustainability and construction, I feel like it has to be by default.  

We have a... Read more

consider supporting Varun Kohli for AIA Board At-Large seat

If you are a voting delegate for the AIA, please consider casting a vote for my friend and COTE colleague, Varun Kohli, FAIA; he's running for the At-Large seat on the AIA national Board of Directors.

Varun is a former COTE Leadership Group member and he understands... Read more

Hi All,

Has anyone dug into ASHRAE 2016 as part of the new v4.1 requirements or as codes start to adopt it? I recently presented on this and thought I should check my math to make sure I'm understanding and communicating this correctly.

My understanding is that there is a new reference baseline, that is essentially the ASHRAE 2004... Read more

Greetings to all of the AEC SD Leaders (a.k.a. the Green Gurus)!

Over the last two months, the 32-member Build-Back-Better (BBB) letter working group has developed a robust list of first 100-days, built-environment-focused executive actions for the Biden administration to consider. Kara Kempski, the AIA’s Director of Federal Relations,... Read more

Does anyone up here do or have familiarity with anyone who regularly does NEPA EIS? If you need a definition for the acronym, please see here: https://www.epa.gov/nepa/national-environmental-policy-act-review-process#EIS. I've been asked if I know anything about it, to which the answer is no, but I'd like to get smarter about it and I'm hoping... Read more

Hi Carbon Working Group,

It’s been a while since our last online meeting on 3/31 –- admittedly, a bit too long -- so I wanted to share some updates.  You might have seen Candice Pearson’s 5/13 post about the structure of the Contractor’s Commitment and how it’s evolving into a set of guidelines available not only to our SCL Group but to... Read more

Welcome to the quiz portion of Seal, Tape, Gasket: A Sticky Search for Better Materials.

Learning Objectives
Upon completing this course, participants will be able to:


1. Choose the best means of achieving barrier continuity for any given application.
2. Assess a joint sealant's service life and product... Read more