Hello,

We are having a discussion / a bit of a debate in our office about the merits and sustainability of different roofing materials. Our current standard is to use a PVC membrane, which we all know is highly toxic. TPO is an obvious alternative that is less toxic, but it has some performance concerns and can often lead to leaking (not... Read more

With the current push for improved window performance to meet energy codes and Passive House, room side low-e coatings can significantly improve window U-values. However, back in 2018 Payette did this excellent study that showed that while room side low-e coatings improved window U-value and increased the interior radiant temperature, the... Read more

Hi amazing people!

Most of our projects are now going with some form of gender neutral/all-gender/inclusive toilet rooms or those that can easily be converted to such. With no urinals, we lose 3 LEED points because urinals are very water-efficient. With urinals, it's not as pure a solution. Do you all just take a hit on the LEED points,... Read more

In the wake of pandemic WFH requirements, we are looking to revamp employee policies and I thought this type of information share would be something we Green Gurus would love to thought-share on. 

We are a very 'low-policy company' (20 when I joined, now 75 employees currently) and our employee handbook is quite small (5 pages). Most... Read more

Welcome to the quiz portion of Measuring Energy Use in Buildings: Do Our Metrics Really Add Up?.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the differences between site energy, source energy, and energy cost.
2. Summarize three ways in which source energy can... Read more

Welcome to the quiz portion of Passive House on Campus: Eight Exemplary Projects​!

Learning Objectives
Upon completing this course, participants will be able to:


Explain the primary reasons that higher-education projects are pursuing Passive House certification, including its impact on the environment and occupant health... Read more

Has anyone used Insight for Revit to document the LEED Daylight Credit If so, would you recommend it?

Thanks,

_Ilana

Green walls provide an important connection to nature in urban settings.

BuildingGreen-Approved Green Walls

We approve green wall systems designed to:

Has anyone had a Contractor track GHG emissions during construction? If so, any advice on how to include that in the project specifications?

Thanks!

Yarden

Our all-volunteer Advisory Board helps BuildingGreen identify the most critical topics for our coverage, and directs our research as we investigate these topics and bring them to our readers. Their distinguished and varied service in the field of environmentally responsible building is an inspiration.

I have been watching LEED Zero for a while, and have appreciated certain things, but one thing I think is an absolute disaster is their allowance of mainline RECs for claiming Zero Energy and Zero Carbon performance.  I just asked this question on the LEED Zero webinar, and the panelist basically said, "it's part of LEED Zero, therefore it is... Read more

Hi All - 

Has anyone explored hydronic system analysis software (1D CFD)? 

Some options are PipeFlo, AFT Fathom, PipeFlow (eerily similar name to first option), COMSOL Pipe Flow Module. 

Applications could range from general system troubleshooting, pump sizing, to district hydronic system network analysis. 

Best,... Read more

Can you comment on successful ways you have used eQUEST and pitfalls you have seen? We are considering training our architects to use it for early building analysis on all projects. 

Hello AEC Sustainability Leaders (aka the Green Gurus)!

As we continue to promote and expand the use of mass timber on our projects, it is becoming increasingly important that we learn more about the spectrum of impacts that this material selection is having on the forests and communities from which we’re sourcing our wood fiber…both... Read more

Hi everyone, 

Following November's SCL Summit, I put together a model Construction Waste Management Action Plan based on the ideas shared in our focus group. It is linked below in Google docs, so everyone should have access to live edit the plan. Please take a look and add comments if you can. It's a very rough outline, so we can... Read more

For more than 30 years, Alex Wilson has been the most trusted voice on energy efficiency and environmentally responsible design and construction. Since launching Environmental Building News (EBN) in 1992, he’s built a reputation, resources, and staff to provide the foundation for BuildingGreen, a consulting and information company... Read more

Hello - I have met several of you virtually over the last couple years. My name is Megan Zack and I am excited to share that I have changed positions and will be the Cheif Sustainabilty Officer at Wight & Company. After spending the last 20 years working as an architect with a small percentage of my time dedicated to sustainabilty, I'll be... Read more

Green Gurus,

We'd love your feedback.

The MEP group is endeavoring to make progress on integrative design. It has been long accepted that integrative design is necessary to make real progress, but a lack of stellar results demonstrates that it is easier said than done.

What is your experience with successes and failures... Read more