Product Guide
Conventional roofs contribute to heat loss, heat islands, and excessive stormwater runoff.
BuildingGreen-Approved Green Roofs
BuildingGreen approves systems with appropriate planting media that can be created from regional materials and may be blended for specific characteristics, such as:
nutrient retention structural... Read moreForum topic
Hi All,
We’re planning a conference here in Boston, October 23rd & 24th, focused on Designing for People. We’re rounding out our speaker lineup and I thought I’d reach out to you all for ideas. If you had an all-star list of people speaking on Health and Wellness in the Built Environment who would be on that list? Send me 3 names... Read more
Quiz
Welcome to the quiz portion of Introduction to Fitwel Certification: On-Demand Webcast.
Learning Objectives
Upon completing this course, participants will be able to:
1. Identify the different categories within Fitwel and the particular human health and wellness aspects.
2. Describe the differences between Fitwel... Read more
Forum topic
Hi! I'm writing a short news piece on WELL v2 and looking for someone very familiar with the existing and v2 standards to interview about the changes. If you meet that description and would like to go on the record with your thoughts, please reply to me directly at paula@buildinggreen.com. Thanks!
Forum topic
Hey there, Tally users. I'm looking for some answers to a few basic questions about using Tally:
When do you typically run a WBLCA? As soon as you have a Revit model? Later, maybe end of DD, when the Revit model is more fully developed? At the end of CDs? Are you mostly using Tally for targeted studies or WBLCA for the purpose of... Read moreForum topic
I'm working on the Best Practice pages, and I want to verify the role of "BITuser experts" (analogous to LEEDuser experts, as shown on this credit page). My questions:
Will we have BITuser experts? If so, will every Best Practice have an assigned expert, or will only some best practices have one?Note that the role of the expert,... Read more
Forum topic
Hi all!
I'm working on my first energy positive / passive house multifamily building and trying to figure out the trash/recycling chute. I am curious what solutions you have employed to make the trash chute air tight? We have excluded the whole chute from the envelope. Do you use airtight doors (and which ones?) at each floor trash/... Read more
Forum topic
Dear SD Leaders,
A friend is looking for a High Performance and Sustainability Leader to join their mid-size architecture company in New York.
If you know anyone that could be interested in this position could you please kindly send them my way?
Thank you
Marzia
Basic page
Our all-volunteer Advisory Board helps BuildingGreen identify the most critical topics for our coverage, and directs our research as we investigate these topics and bring them to our readers. Their distinguished and varied service in the field of environmentally responsible building is an inspiration.
Steve Baczek, R.A., Reading, MA Bob... Read moreQuiz
Welcome to the quiz portion of Cool Products from the Latest Greenbuild Expo.
Learning Objectives
Upon completing this course, participants will be able to:
1. Describe innovative products for HVAC and the building envelope.
2. Describe innovative products for saving water and managing stormwater.
3.... Read more
Forum topic
Does adding solar panels reduce a building's EUI?
Existing operational use of a building is 80 kBtu/sf/year. When we add solar, it will change the source of energy but does not change the usage.
My understanding is that the EUI does not change, but it would be good to hear from others.
It's energy consumption at the point... Read more
Forum topic
We have a client for whom we are designing a very high performance manufacturing facility, and they want to communicate their building's performance both dynamically and in real-time within their lobby for guests and staff.
We would like to mine the wisdom of this group to see what recommendations we can muster regarding high quality... Read more
Forum topic
Related to some recent questions on site-specific sun/wind analysis and early energy modeling tools, are there any tools that account for nearby topography (like bluffs) or large buildings/vegetation in energy calculations? Or favorite methods to estimate its impact particularly during early massing studies?
Thanks,
Rachel
Forum topic
Is anyone else working on a project doing Living Building Challenge v4.0 Energy Petal? We're working through the Imperative 08 Net Positive Carbon Resiliency Strategy requirements that ask for the project to be habitable for a week in the event of an emergency. We're curious how others are defining "habitable" and what systems assumptions... Read more
Forum topic
Hi folks,
We often hear from you with a suggestion of someone who would be great for the network, and a question about how to refer them. We've now made that easy, with three steps laid out in an Outreach Toolkit that's posted in the left margin of the Member Directory.
So, if you're thinking of someone to invite or come across... Read more
Forum topic
Hello Gurus,
I am working with an owner who is making zero-carbon commitments and wants to explore setting carbon budgets in their capital plan (and subsequently their individual projects). We will be starting exploratory discussions next week and I was hoping some of you might have been working with other owners who have already... Read more
Forum topic
Hi folks,
We will be having a call for the Sustainable MEP Leaders group on Monday, April 8 at 3pm Eastern time. Hope you can join us! We'll be talking about our first in-person Summit, as well as diving into discussion about some top-of-mind topics related to being a sustainability point person within an MEP commercial practice. Here’s... Read more