Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Dear all,

On a major renovation where the wall R-value/U-value needs to be brought up to energy code, specifically a mass wall situation, does anyone have insights on how the situation is best dealt with? On the project in question for me, the continuous insulation might have to be added to the inside surface of the mass wall and there... Read more

Howdy all,

Following up on Emily's post (https://www.buildinggreen.com/forum/aia-2030-zero-tool-vs-cbecs-baseline) on AIA2030, the folks on the steering committee's monthly call thought it'd be a good idea to do a general call for feedback on reporting this year while the bangs and bruises are still fresh. The intent is to compile the... Read more

Welcome to the quiz portion of Exterior Paints: Long-Term Protection and Environmental Tradeoffs.

Learning Objectives
Upon completing this course, participants will be able to:


1. List the primary differences between alkyd and latex paints and stains and between wood, concrete, and metal primers.
2. Explain... Read more

I see Kjell Anderson, Mary Ann Lazarus and Daniel Overbey as the Green Gurus on this list - if i missed anybody apologies.

Congrats all around folks!

https://www.usgbc.org/articles/gbci-announces-2018-leed-fellows 

Some of you saw my 5-minute presentation about the Rich Earth Institute in Brattleboro, Vermont and how it is inventing new ways to keep excess nutrients from urine out of surface waters and use them instead as fertilizer. Now you can also hear about it on Planet Money: https://www.npr.org/sections/money/2018/01/26/581156723/episode-820-p-is... Read more

My colleague, Kira Gould, from the AIA National COTE communications committee, has a great question I am reposting here...

AIA National COTE: In the early 00s, COTE supported an initiative through which we created a Guide to the Green RFP and collected sample RFP language. That now dated guide is no longer findable in our resources and... Read more

Blast from the past when 179D first hit the scenes.

Are any of you still using this and if so, has it been easy, successful, worthwhile etc

and Happy New Year !

I understand the AIA 2030 team is hoping for as many firms (and projects) to submit some form of LCA data in the new DDx website this week, in order to learn how the industry is tracking embodied carbon.  We have four projects that dabbled with Tally last year, which we'd like to report this week.

Has anyone run into a hurdle where you... Read more

Hello all, there has been a fair amount of discussion about the emerging Cove Tool for early stage energy modelling and parametric optimization at our firm. I am very curious if any of you are using this software, and if so, what are your thoughts about it? 

https://www.covetool.com/

Thanks,

Esteban Matheus

Hi All: I'm writing to see if I can get some recommendations/links to some great, free web tours of sustainable projects for use in an intro to sustainability class I'm teaching online this fall. Typically we tour some local buildings but that isn't an option this year. I'm hoping to find a few different ones for students to choose from. They... Read more

Good daylighting intentions can end up increasing glare and solar heat gain.

BuidlingGreen-Approved Lightshelves

We look for lightshelves designed to reflect direct sunlight onto the ceiling, turning what could potentially be glare into diffuse, ambient daylight that penetrates deep into the interior of a building.

Energy... Read more

Hi, Green Gurus!

We have a great opportunity available at SERA for someone to join our sustainability team as an Integrated Design and Certification Specialist. Details are posted to our website: https://www.seradesign.com/careers/
Could you please share with any good candidates that you think might be interested. And of course, I’... Read more

I'm just wondering if anyone is using GBCI's Better Materials site as their go-to source for transparency and healthy materials.  Having all the search engines on one platform is great in theory, and I keep hoping that it will be the one-stop site/resource that I can get all our designers to use.  Unless I'm missing something though, it still... Read more

Hey gang,

We're working on a project that's currently designed as mass timber. We're up against some cost control efforts (of course) and the CM/Client is asking about changing some of the building to steel or green steel. We set out with a goal on the project that within the core and shell, Module A GWP emissions will be net zero.... Read more

Sages - see below for what was posted in the SDL forum

seems this topic needs all of you - to guide, critique, move, question

nadav forgive the blend posting but I dont know who sees what, and the SAGES are the bomb on this kind of troublemaking

thoughts all?

PFAS is in everything and you – Please join

Hello... Read more

Is anyone planning on attending the WELL Conference in Scottsdale in March?  I'm trying to figure out if it's worth attending or not?