This is specifically to Chris but also to anybody who is interested in the topic - which Chris raised on our SAL call today, regarding how to influence change:

From this article, which i thought was good but had a great paragraph pulled below.

https://www.nytimes.com/2020/02/12/business/Steve-Mollenkopf-Qualcomm-corner-office.html... Read more

Does anyone here have a draft spec for low embodied carbon concrete they could share? I see the GSA has a standards sheet with MGWP limits, but we are hoping to actually specify the mix for upcoming projects.

I'm guessing this is the most impactful thing any of us could do over the next couple of years. Energy Codes are far and away the biggest lever that our industry has in fighting climate change. I'm up to my eyeballs in commitments at the moment but heartily encourage you (yes, YOU!) to sign up.

...

Hi all – if any of you are... Read more

Pierce Quéry, Roving Reporter

Does anyone have experience pursing SITES certification on an essentially a zero-lot line project?

We are required to achieve silver certification, but the project scope/phasing recently changed and the entire site/parking area was eliminated and we no longer have a green roof. It still appears we can meet silver certification as so few... Read more

For questions, please email Jerelyn Wilson directly

Welcome to the quiz portion of Engineering a Wood Revolution

Learning Objectives
Upon completing this course, participants will be able to:


1. Compare engineered wood to steel and concrete; and describe how engineered wood offers better dimensional stability, less waste, and more consistent performance than... Read more

Hi all,

I had a position listed for a Sustainable Design Coordinator which we have down for the moment as we've taken on a fall intern instead. In the interim, however, I did have a couple of great candidates that I'd like to help find good matches. One of those candidates is Marissa Lantieri, see her resume and portolio attached.

Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon construction, however, may be less familiar. 

Contractors are just... Read more

Hello Gurus,

I’m writing to share with you an effort a small group of lighting designers from the Boston area started which is now rolling into a large scale effort.  We’ve put together a Lighting Advocacy Letter to accelerate the sustainability of lighting products. Inspired by the AIA Materials Pledge, the letter is intended to... Read more

Colleagues,

As we all know, ventilation rates must be kept the same between the LEED Baseline and proposed energy models. However, we're aware of projects that have been able to claim energy savings associated to reducing ventilation using systems like Aircuity. 

Have any of you successfully claimed credit for reduced airflow due... Read more

Hello Sustainable Design Leaders!

I have an exciting announcement today, fall Peer Network events are now open for registration! You can see all the event details and register here!

Based on feedback we received from past events and the most recent surveys, we decided against doing one long week of events for this fall and instead... Read more

Hey Everyone!

We are delighted to share a major milestone in our commitment to sustainable design. After two+ years of intensive research, refining, and internal application, NBBJ is thrilled to announce the external launch of ZeroGuide, an innovative tool for early-phase carbon estimation, now available to the entire AEC community!... Read more

Chillers are part of larger systems that provide cooling in large commercial buildings.

BuildingGreen-Approved Water Chillers

Because there isn't a single relevant efficiency standard for chillers, approved products use innovations such as magnetic bearings, variable frequency drives, or other technologies that significantly... Read more

I am getting started on a research project to evaluate the feasibility, costs, and benefits of using phase change material (PCM) to passively regulate temperature in Minnesota buildings. If anyone has experience designing with PCM, installing PCM, or occupying buildings with PCM, can you share any lessons learned that would be relevant as... Read more

Hi SDL: Please see attached letter to USGBC about the urgent need to address climate change in the next iteration of LEED v4. It's based on the realization that in the last few years it has become clear that climate change has become the dominant global threat to humans and our fellow species. And it has also become clear that the steep... Read more

Does anyone have an opinion of Autocase?    https://autocase.com/

I had not heard of this platform before.  Their website says that some firms in the group are customers / users.   Website does not do a great job of describing exactly what they do.  Is there value?

Thanks,

Allen