We are attempting to use Tally on a couple projects and are wondering how others are using the tool in their design process. If any experienced users out there would be willing to have a brief phone conversation I would appreciate it. Thanks

He just posted the following on the Building Performance Knowledge Community forum:

Does anyone have a recommendation for software that is easy to use and relatively inexpensive for doing energy performance analysis at the schematic design (or before) phase?  We are looking for a tool that gives good quantitative comparisons for... Read more

Welcome to the quiz portion of Introduction to Fitwel Certification: On-Demand Webcast.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Identify the different categories within Fitwel and the particular human health and wellness aspects.

2.  Describe the differences between Fitwel... Read more

Welcome to the quiz portion of Reexamining Priorities in Green Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define green building priorities from a few different angles (separating process priorities from outcome priorities).
2. Differentiate those priorities... Read more

Folks, would love to hear what software you're for in-house daylighting/energy performance modeling at the SD/DD level. My IT folks have been pushing us to try out Autodesk's Insight again after a not so impressive pilot we did a few years ago. Has it gotten better? Was it us? What programs do you feel good about? Which ones really make you mad... Read more

Our building scientist has been using Insight 360 to model daylight and document it for LEED certifications.  However, it appears that Autodesk is no longer fully supporting the tool and may eventually stop all together.  (we have not been able to run simulations for weeks due to a change to how "cloud credits" work on their end that they... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Glazing is by far the most complex single component of our enclosures and it must be climate-tuned to boot. Getting the amount, the location, and the performance attributes of glazing is key to... Read more

I know we have talked about this on various calls, so I wanted to post in case anyone hasn't seen that the IRS has provided an update with rules on how to access the direct pay option.

https://www.usgbc.org/articles/irs-issues-ira-tax-credit-rules-tax-exemp...

Hello Sustainable Advising Leaders,

Here are the notes from the last Zoom call. We had a great turnout! Looking ahead, now that things are rolling along we’d like to get into the rhythm of a regularly scheduled monthly call. Since Tuesdays seem to work well for most people, I am proposing the 4th Tuesday of the month from 3-4pm ET. That... Read more

Pipe that delivers domestic water in North America is typically made from copper, chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX), all of which present environmental challenges. Bimodal polyethylene  (PE-RT) and polypropylene (PP) are potential alternatives with lower climate and health impacts.
... Read more

Beginning this year, Miller Hull will not only continue to quantify the upfront embodied carbon of every project we finish through construction, but now purchase third-party certified carbon offsets equivalent to one-third of the project’s impact. Great design is no longer enough - we must take responsibility for our architectural impact in the... Read more

Hi all,

I've tried a couple of different search terms for the forum but haven't been able to find any past conversations on electrochromic glazing yet (which makes me suspect I might be missing something...). We have a potential opportunity to use it in a vertical curtain wall application with a client that is very interested in the... Read more

Hi All,

I wanted to pass on a few cool things we have going on at Built Environment Plus (formerly USGBC MA)  I really am conscious of not spamming you often and reserve posts for some of our most exciting happenings.

August 5, Building Tech Forum/MaterialsCAN: Getting to Zero with Embodied Carbon. Featuring 13 5-minute... Read more

Hi everyone,

Thanks so much to all who filled out the Doodle poll for the Sages monthly call meeting time, and to those who have introduced themselves on the forum.

We’ll be going with Monday, March 11th at 4 pm ET for this next meeting, and I’ll be sending out a calendar invitation shortly. It’s been a tough call to make — we... Read more

Hello, 

All my experience with sustainability has been at the building-level. We are currently being asked within an RFP to list our firm's ESG score and certifying organization. Our firm is about 300-employees and is owned soley by the employees. 

When do A/E firms obtain an ESG score?

is it based on company size? or... Read more

As I mentioned in my five-minute presentation this morning and then discussed a little more in the break-out on RELi that followed, the full RELi Rating System, in its current form, has now been posted online: http://anyflip.com/zyqc/mdir/

Unfortunately, this is only posted as a flipbook, currently (viewable online only), and isn't... Read more

Welcome to the quiz portion of The PVC Debate: A Fresh Look.

Learning Objectives
Upon completing this course, participants will be able to:


1. Examine the actual cost-effectiveness of PVC in terms of quality.
2. Explain what makes PVC a health hazard.
3. Recognize market effects of PVC's durability and... Read more