All,

Beck is making great strides in our AIA 2030 Commitment and we are looking for an experienced energy modeler to join our team, please reach out if you know of anyone that is looking and has energy modeling experience.  the job is posted on our website:  https://beckgroup.applicantpro.com/jobs/1011136.html

Jason F. McLennan

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Hi all,

We're doing some tool-related soul searching at WRNS and some folks here have raised Cove.Tool as a potentially interesting addition to our library. I'm looking for any insight you all can provide. Cove has come up various times, but curious if there's been any change for the better/worse in the past few years.

Do you use... Read more

Dear Gurus,

At Greenbuild this year I'll be discussing how statistics can lie (in the context of green building claims).  I'm collecting examples of this to prepare.  If any of you know of examples, please send them to me! 

Here are a few of the fun ways statistics might lie that I would be looking for: biased or too-small sample... Read more

Welcome to the quiz portion of Changing Building Design Priorities for a Changing Electrical Grid!

Learning Objectives
Upon completing this course, participants will be able to:


Define a “Highly Variable Renewable Energy” generation asset, or VRE, and understand how VREs can most effectively contribute to the... Read more

Hi, the SF Dept of Environment is doing some surplus construction materials studies there are surveys for designers and contractors.  They are looking for a wide array of responses, so don't worry if you don't live in that area!

See link for contractor survey if you are interested: 

https://formfacade.com/public/... Read more

Has anyone seen a comparison between IECC 2021 and previous versions of the energy code, including ASHRAE 2010? I'm curious how far ahead code buildings are relative to LEED v4.0, and how much the latest IECC raises the bar relative to the previous. I did a quick search for the LBNL and other studies that look at this, but didn't see anything... Read more

Avoiding Toxic Chemicals in Commercial Building Projects

We’re excited to issue our special report, Spec This, Not That.

In updating the report in 2020, we engaged a respected toxicology and regulatory-compliance firm to review and assist in our revision of the entire publication. This edition reflects the latest science in... Read more

As I mentioned in my five-minute presentation this morning and then discussed a little more in the break-out on RELi that followed, the full RELi Rating System, in its current form, has now been posted online: http://anyflip.com/zyqc/mdir/

Unfortunately, this is only posted as a flipbook, currently (viewable online only), and isn't... Read more

I had a client ask recently if there is a 'better' global social justice tool than ILFI's JUST for use outside the U.S. 

Personally, I'd look to WELLv2 feature C12 - Organizational Transparency for other options... but personally have very limited knowledge of options c-e.

Do folks have an opinion on if any of these prograams are... Read more

Re: 310 CMR 78.00: Ban of Covered Products Containing Certain Flame Retardants. This law took effect as of April 01, 2021, and is enforced by Mass DEP. 

Quick Summary: Law bans 11 types of chemical flame retardants from... Read more

Dear SDLers,

I wanted to share that Canadian Architectural Professionals declared a Climate and Biodiversity Emergency and Committed to Urgent and Sustained Action. The declaration was launched last Friday as part of a week of events surrounding the UN Climate Action Summit in New York. Like others around the world, the week of global... Read more

Greetings SDLs - I am looking for recommendations for VLT meters that folks have had sucess with (reliability, accuracy, etc.). Are there any that art partiularly useful when in the field for existing buildings? 

Many thanks,

JD

Does anyone have install experience with Duracryl yet? I'm looking at it for a large project in place of Marmoleum. We've had multiple instances of install failures with Marmoleum, which leads to lots of finger pointing.