Southface will need a procedure for adding and assigning SMEs to the BITuser site. Normally you could just create the user in BITuser and assign the role right there, but we have the added complication of Salesforce SSO, which means the sequence will have a few extra steps.

Here's the basic outline:

Hello, I'm wondering if anyone out in the network has experience with the following:

>Low carbon concete mixes for polished concrete slabs: we're hearing concerns from our concrete supplier that using a low carbon mix design for a polished concrete slab will cause pitting. What experience do others have?

>Low carbon concrete... Read more

In looking for ways to reduce jobsite waste and lower our carbon emissions, I'm working on a business plan for centralized procurement, in lieu of individual project purchasing their own tools, PPE, & consumables.  I'm curious as to how many other GC's on here use (or have used) a central purchasing process and if you have any pros/cons... Read more

Hello SDL Leaders,

Over the past month, I have been working with ILFI to navigate the question of residuals in LBC compliant products vs. products reporting for a Declare label.

Through our conversations, it came to light that ILFI considers the LBC Red List threshold to be 10,000 ppm, rather than the 100 ppm written into the... Read more

Hello SCL, 

For those who missed our last call, I am posting the results from the 2023 Contractor's Commitment reporting cycle. Reporting at some of the higher tiers requires sharing case studies or information with SCL or the public. All the information that can be shared publicly (or that I received express permission to share) is now... Read more

Phase one of the website will not include e-commerce (i.e. paid membership) but the BIT team wants to restrict access to some parts of the site, including the full Best Practices documents and the forum. This means we'll need a rudimentary paywall, directing users to register for full access.  Current registered users of BuildingGreen and... Read more

Protection against corrosion is the primary function of steel coatings, which often contain corrosion inhibitors, volatile solvents, heavy metals, and other hazardous chemicals.

These coatings are specified when steel is used structurally, outdoors, or in high-use areas. In these situations, hazardous coatings are often applied off-site... Read more

Hi All - 

Has anyone explored hydronic system analysis software (1D CFD)? 

Some options are PipeFlo, AFT Fathom, PipeFlow (eerily similar name to first option), COMSOL Pipe Flow Module. 

Applications could range from general system troubleshooting, pump sizing, to district hydronic system network analysis. 

Best,... Read more

I have been watching LEED Zero for a while, and have appreciated certain things, but one thing I think is an absolute disaster is their allowance of mainline RECs for claiming Zero Energy and Zero Carbon performance.  I just asked this question on the LEED Zero webinar, and the panelist basically said, "it's part of LEED Zero, therefore it is... Read more

Hi (again) all,

Jacobs is looking to hire specifically for sustainability needs! We have a current job posting for a Senior Sustainability Specialist now up, and anticipate a similar posting soon for a mid-level person as well. Location for these would be in the Mountain or Pacific time zones, remote work is fine; other future... Read more

Welcome to the quiz portion of Deep Dive into the Integrative Process with Marcus Sheffer (recorded webinar)

Learning Objectives
Upon completing this course, participants will be able to:


Lake|Flato developed a project process road map as an internal project management tool over a decade ago, and we're looking into updating it.  It serves as a sort of "checklist" of major design, sustainability, and QA/QC milestones for each project phase.  I know we've talked about similar tools at other firms at past SDL summits, so wanted to... Read more

Hello - I have met several of you virtually over the last couple years. My name is Megan Zack and I am excited to share that I have changed positions and will be the Cheif Sustainabilty Officer at Wight & Company. After spending the last 20 years working as an architect with a small percentage of my time dedicated to sustainabilty, I'll be... Read more

Welcome to the quiz portion of LEED vs. Green Globes: A Definitive Analysis

Note: If you are taking this quiz as a member of LEEDuser, please take the quiz here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Highlight the most significant differences between LEED and Green... Read more

I'm putting together information on natural gas bans (or put another way, all electric buildings) for an advocacy effort and looking for some experts. Anyone have thoughts on banning natural gas and other fossil fuels on residential projects? Specifically what are the considerations/challenges/opportunities at each scale (single family, low... Read more

Curious to see if your firms have researched metals and established a preference for what you use for roof and wall panels?  I'm interested in ranking environmental performance for painted steel, galvanize steel, weathered steel, painted aluminum, zinc, etc.

ASHRAE 209 in all its glory has been uploaded. This will impact our architectural process, for better or worse, so we should embrace it and learn from it. The revised AIA Energy Modeling Design Guide (due out next year) has been timed to correspond roughly to 209 coming out and will include references to it. The first few energy modeling '... Read more