Hey SDL,

I'm curious if anybody out there has developed specification language requiring a certain level of airtightness (as assessed via one or a series of blower door tests) for a commercial project when it is not going for a Passive House certification and a blower door test is not required by code--basically, something in the... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

SDL folks,

I wanted to make sure that you all saw that the call for presentations is open for AIA Houston’s Gulf Coast Green conference.  GCG is the leading sustainable design conference in the region and has historically had some great participation from this group.  The theme this year is Sustainability + Technology.  Details here:... Read more

SDLers – For one of our projects we are working with local tribes to procure timber. We would also like to get FSC certification, but haven’t found significant overlap between these two criteria in the Pacific Northwest. There appear to be two certification entities in our area: Northwest Natural Resource Group and Trout Mountain Forestry.  I’m... Read more

Hello all!

I'm new to the group, and so excited to be here. Two part question here (as we think about processes and new year goals).

I am at a smallish firm (20 people) in Boston helping to reform our processes to enable even those that are not steeped in sustainability at a daily level to be comfortable looking for opporutunities... Read more

Hi there colleagues!

Out of curiosity, do you plan on attending Greenbuild in person in San Diego in September? My staff asked me if we were going and my answer is partially contingent on the extent to which attending would mean getting to see some of our favorite people (read: all of you). Looking forward to taking the temperature of... Read more

Welcome to the quiz portion of Are Cool Roofs Green? The Answer's Not Black and White

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain why roofing choices are complicated by heating tradeoffs, climate effects, and condensation and how cool roofs are intended to reduce... Read more

For consideration in determining CM "Greenness", are we leaders if we wait for city ordinances?  can we collectively agree/adopt a standard?

and for those of you in this market, how is this being received and implemented?

https://www.portlandoregon.gov/bps/article/701085

Multnomah County, City of Portland commit to reducing... Read more

Hello Green Gurus,

Now is a pivotal moment. Net Zero Stretch Code legislation has been proposed in the Massachusetts House and Senate, and draft code language is currently being developed by the Board of Building Regulations and Standards (BBRS). The Net Zero Stretch Code is currently the greatest single opportunity to support reduced... Read more

Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

Hello - 

I am looking for the recording and the PDF/ slides that were shared 3/6 for the project process share-out/ 5 min presentations. It was super inspiring and I would like to refresh my memory of some of what was shared. Thank you!

–
Alison Nash 
AIA, LEED AP ID+C, CPHC, WELL AP
Associate | Sustainability... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Are your clients asking you about wellness? You’re not alone. Employee health and wellbeing has been called the ‘second wave of sustainability.’ In this hour-long live webinar, GreenStep Education’s Alex Spilger will walk you through Fitwel certification, including its requirements... Read more

Good morning, All,

Just a bit of news this morning.  My family and I are moving back out west!  I am continuing in my current role with EwingCole, but will be doing so from Portland, Oregon.  Although North Carolina has a been a wonderful place for us for the past 13 years, it is time to be close to family in the northwest and southwest... Read more

Poppy Gasbag

Hi all-

We are dabbling in developing an official research component of our firm. We have collaborated with a class at a local university and are looking for ways to take our research to a higher level. I'm curious how some of the other firms doing design or building technology research approach the process. For instance, do you have a... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more