Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

Jennifer is part of the Peer Networks team at BuildingGreen. Her Connections Catalyst role for the Sustainability Leaders networks includes events planning and bringing in new members.

Jennifer’s experience before BuildingGreen includes two years working with AmeriCorps Cape Cod on outdoor environmental projects; a year teaching... Read more

Exterior paints, stains, and primers—particularly alkyds—can have very high volatile organic compound (VOC) levels and can contain numerous chemicals of concern.

BuildingGreen-Approved Coatings

BuildingGreen lists exterior coatings that meet the South Coast Air Quality Management District’s (SCAQMD) VOC requirements of 50 grams... Read more

SDL Group -

Hi all!  After a brief hiatus from the group to move from New Orleans to Portland (OR), start a new job at ZGF Architects, buy a house, and  see my baby boy become a toddler (all in the past year!)---- I'm ready to plug back into the group.  Seeing folks at the ILFI conference re-energized me to reengage :)

So…..does... Read more

Was anyone else surprised to see ASHRAE 228-2023 using eGRID Subregions for both the Regional Electricity Source Energy Conversion Factor and Regional Electricity Greenhouse Gas Emission Factors? In the past I have used eGRID sub-regions but also State and local utility conversion factors depending on what energy or operational carbon story I... Read more

Does anyone know about temporary flushout equipment that could be used to augment a building's systems to get additional CFM of OA during construction?  For our non-laboratory type projects the flushout period ends up being too long, especially in either humid summers or frigid winters (Pennsylvania).

Hoping that some of you on either... Read more

Hi folks,

We're currently scoping out a BuildingGreen report on how the global market for recycled/recyclable materials has changed over the years, and what that means for waste management practices in construction, and for the availability of recycled content materials. 

This ties into the goal from the SCL Summit about LEED... Read more

Hi! We're putting together a pre-summit survey to collect input from everyone who's signed up for the Summit; we'll use that to prep the agenda for our get-together July 9-10.

Based on our last few phone calls, here's a list of topics on our radar. If there are others you'd like to see added to the survey, or if you have more thoughts... Read more

Hi Everyone,

Please mark your calendars for next Tuesday, March 17th, 2020 3pm ET (Noon PT) for an SCL webcast with Mark Chen at Skanska and Emi LaFountain at Turner Construction on Quantifying Jobsite Carbon Emissions. 

Description:

Quantifying Jobsite Carbon Emissions w/ Turner and Skanska
The focus of embodied... Read more

Dear all,

A mechanical engineer on a healthcare project we are working on has asked for help in dividing the ventilation calculations between ASHRAE Standards 170 and 62.1; can anyone here help shed some light on it?

"This is the first time I am working on LEED for a hospital and I am not sure how the template wants me to show... Read more

I am still basking in the afterglow of this week's summit, and getting ready to share nuggets of wisdom with my colleagues at our all-staff next week. I was so immersed in the moment that documenting the outlines and choices presented for breakouts slipped my mind. Is there somewhere to access these slides to refresh my memory?

Thanks... Read more

I'm exploring the use of phase change material for a project. Specifically, looking at the BioPCM/ENRG Blanket product. I see on their website that ZGF used it at University of Washington. I'd love to hear any feedback from folks who have used it, and more specifically how your energy model and MEP engineer accounted for it. Thanks!! https://... Read more

Is everyone else having trouble with a dysfunctionally slow LEED-Online today (i.e., worse than the usual incredibly slow performance)?

Hello SMEPers,

I’m hoping to crowd source some anecdotes for a guest lecture I’ll be giving at Yale’s architecture school. The topic is integrated design (especially between architects and engineers) and how it enables better sustainability outcomes.

John Boecker has this great story about how choosing a paint color with higher... Read more

I'm the Director of Sustainability at Columbia Construction.  We're headquartered in the Boston area and primarily work in the Northeast.  Along with the typical challenges of projects and evolving rating systems, I'm looking forward to learning and sharing strategies for corporate sustainability progress.

This past year I'm proud to... Read more