Hello, All,

Does anyone have experience with cove.tool (https://covetool.com/)?  Perhaps for those projects that may not get fully modeled, or as a tool to help set baselines?  It came across our radar recently, and I'm wondering if the subscription might be worth a try.

Thanks! 

Maria

Hi everyone,

Thanks so much to those who attended and shared at the Greenbuild 2024 Show & Tell! As always, we had a riveting lineup of presentations.

The slides for the presentations are below. We have permission from all of the following presenters to share the slides within Peer Networks-only spaces, but only the slides... Read more

To piggyback off Nathan's introduction where he mentions construction waste management, who is doing anything innovative or different in managing construction waste?  Construction waste has not historically been a passion of mine, but now working in sustainability and construction, I feel like it has to be by default.  

We have a... Read more

For questions and/or to be added to the Summer Summit waiting list, please email Jerelyn Wilson directly.

2019 Summer SDL Summit
Islandwood, Bainbridge Island, WA
July 31st- August 2nd, 2019

If you want to know more about the MEP 2040 Challenge, our first quarterly forum will be held on March 18th, 2022 11 am to 1 pm Eastern, and will be discussing decarbonization in the MEP space.  See link below for the agenda and registration.

https://network.carbonleadershipforum.org/civicrm/mailing/view?id=206&reset=1

I... Read more

Hello Sustainability Leaders!

It’s been almost a month since we met in NYC for our Regional Mini-Summit! I’m pretty sure time moves faster when the seasons are changing! I hope the fall is treating you all well.

We have completed our Post-Summit Report, and would like to share with you all. Click here to view the report.

... Read more

Furnaces heat air that is then distributed through ducting and warm-air registers.

Approved by BuildingGreen

Products approved by BuildingGreen include the highest-efficiency, sealed-combustion furnaces and high-efficiency wood or multi-fuel furnaces. A multi-fuel furnace uses several sources of energy such as wood, wood-pellets,... Read more

Please help share the latest COTE news, with reports from the AIA Conference, a letter from chair Lori Ferriss, Michelle Amt's review of the 2023 Top Ten winners, and more.

**Be sure to make a note**
The COTE Top Ten Awards cycle has changed. The adjusted timeline is already upon us: The 2024 awards call opens on August 8, and... Read more

Welcome to the quiz portion of Better Steel, Lower Impacts!

Learning Objectives
Upon completing this course, participants will be able to:


Understand the process of how steel is made.

Recount how the U.S. steel industry has been improving its environmental footprint, while improving product performance.

... Read more

We're now mid-way through Summer Summit season! One of the “good problem to have” challenges we’ve had at recent SDL Summits has been too many great five-minute presentations. It’s hard to find time for them all. This year, since we’ll be online anyway, we can get a jump on that by starting the five-minute presentations early in addition to... Read more

Looking for 2-more flushometer style dual-flush flush valves to put in a public project spec alongside sloan uppercut and cannot seem to  find any.  Does anyone have any that they have used?

Thanks in advance!

I'm looking for successful examples of net-zero, Living Building, or similar office buildings that are NOT owned by highly-motivated organizations like RMI or the Bullitt Foundation (or one of your firms).

We are looking to team with a developer on a small-mid-size office building that will house our new office with us as a tenant (no... Read more

Hello all, there has been a fair amount of discussion about the emerging Cove Tool for early stage energy modelling and parametric optimization at our firm. I am very curious if any of you are using this software, and if so, what are your thoughts about it? 

https://www.covetool.com/

Thanks,

Esteban Matheus

I'm working with the AIA Minneapolis chapter on guidance for small firms related to how and when to energy model. A lot of small firms would like to sign the AIA 2030 Commitment (we had 100 in a room in 2022 in a session led by Nadav and Gwen Fuertes). But we have learned that a) they don't have a good way to energy model small commercial to... Read more

Hi All,

The SMEPL's Embodied Carbon committee has been hard at work developing a letter that calls for MEP equipment vendors to increase material transparency in their products.  As a way of contacting the most widely-used vendors first, we're asking each of you to enter your "Top 3" specified vendors for each of the products listed in... Read more

Nancy Eve Cohen is the managing editor at BuildingGreen. She brings the highest standards to her work, with the goal of providing trusted and accurate information and analysis for BuildingGreen’s readers.

Previously she worked in public radio as a reporter and editor for more than two decades, where she specialized in environmental... Read more

For those who are visiting Chicago, Kira Gould has asked me to spread the word about a casual AIA COTE meet-up. Stop by, meet friends and have a beer.

If you will be in Chicago on November 15, please consider joining a casual meet-up of COTE leaders/members/friends (no fee to join; it's pay-your-own-way at the pub):  

AIA COTE... Read more