We are attempting to use Tally on a couple projects and are wondering how others are using the tool in their design process. If any experienced users out there would be willing to have a brief phone conversation I would appreciate it. Thanks

Hello! i had in my notes that the group interested in jobsite wellness was going to schedule a call mid-January.  I don't remember who was leading the effort.  does anyone have a list of who is on what committee?

thanks!

Hello all,

I am reaching out to this community as SMMA has a job opening for a Sustainable Design Analyst (like many of you recently posting job openings on this forum).

Here is the job posting link: https://smma.applytojob.com/apply/mah0aDkOJ0/Sustainable-Design-Analyst

Please note that this position will support... Read more

He just posted the following on the Building Performance Knowledge Community forum:

Does anyone have a recommendation for software that is easy to use and relatively inexpensive for doing energy performance analysis at the schematic design (or before) phase?  We are looking for a tool that gives good quantitative comparisons for... Read more

CEUs are available for reading our entire plumbing guide. Click here to learn more and take the quiz.

Excess heat generated by air conditioners, refrigerators, boilers, and water flowing through pipes typically goes unused.

BuildingGreen-Approved Water Heat Exchangers

BuildingGreen lists desuperheating technologies and... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Glazing is by far the most complex single component of our enclosures and it must be climate-tuned to boot. Getting the amount, the location, and the performance attributes of glazing is key to... Read more

Beginning this year, Miller Hull will not only continue to quantify the upfront embodied carbon of every project we finish through construction, but now purchase third-party certified carbon offsets equivalent to one-third of the project’s impact. Great design is no longer enough - we must take responsibility for our architectural impact in the... Read more

I've been hearing recommendations for bipolar ionization, as a way to filter airborne virus particles in HVAC systems while avoiding the energy penalty of increased ventilation. However, I've also heard that ionizing equipment is dangerous because it produces ozone.

Does anyone have any insight into the effectiveness and/or cautions... Read more

There are a number of SDL and other peer network folks talking about a potential casual meet up in association with Living Future 24 (next week in ATL).

In the interest of Julie McCoy-ing this thing into being ... 

Who: All y'all ... any Peer Network folks who are in town for LF24 (or local to ATL). 

Why: Connecting is... Read more

Hi all,

All members of the WA Building Code Council received an email from Tim Attebery of the Washington State AGC and I'm trying to make sense of the role of the AGC and whether it is representing the consensus option of general contractors in Washington or not. The letter is very much against the energy code advancement, which... Read more

Our building scientist has been using Insight 360 to model daylight and document it for LEED certifications.  However, it appears that Autodesk is no longer fully supporting the tool and may eventually stop all together.  (we have not been able to run simulations for weeks due to a change to how "cloud credits" work on their end that they... Read more

Hello SAL Members - after last month's call, and invitation to do some thinking around the direction of the group, a few of us connected and brainstormed questions that might help guide and refine our network. It would be great to have a conversation around everyone's needs and goals, so if you could please take 5 minutes to respond to these... Read more

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Hi folks,

It's here! Highlights, key takeaways, and pics from our packed few days together in Ashland, Mass. in the 2023 Summer Summit report.

From the intro:

Effectively meeting the challenge of the moment is what the world needs from us. Being grounded and energized by connections and sharing with our peers in a safe... Read more

Welcome to the quiz portion of "Spec This, Not That: Avoiding Toxic Chemicals in Commercial Building Projects"!

Learning Objectives
Upon completing this course, participants will be able to:


All,

Beck is making great strides in our AIA 2030 Commitment and we are looking for an experienced energy modeler to join our team, please reach out if you know of anyone that is looking and has energy modeling experience.  the job is posted on our website:  https://beckgroup.applicantpro.com/jobs/1011136.html

https://www.linkedin.com/company/buildinggreen/jobs/