Hi folks,

It was fun going back over all the great conversations we had and pulling them together in this report. Please feel free to share it with anyone--no constraints on that!

Also, we'll have a webinar next Friday based on this report-- March 8 at 2pm eastern:

I'll show the report and share key takeaways from the 12th... Read more

Poppy Gasbag

Hello -

We're hiring two interns this summer. One position is in Urban Design & Planning, the other is an architectural position split roughly equally between our Housing Studio and our Sustainability Resources Group. If you know of potential candidates who might be interested, please forward this link. http://www.seradesign.com/... Read more

Pipe that delivers domestic water in North America is typically made from copper, chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX), all of which present environmental challenges. Bimodal polyethylene  (PE-RT) and polypropylene (PP) are potential alternatives with lower climate and health impacts.
... Read more

Nothing exciting like embodied carbon or EPDs... but I'm interested in some real talk on the actual performance of low-flow fixtures.  

We continue to encounter pushback on water-saving fixtures for concerns of ongoing performance. I'd love to have a dialog in this group because I find it hard to believe these challenges can't be... Read more

Hi all,

Looking from insights from anyone who's been through WELL certification before - we've got a lab/office project pursing WELL down in Florida that is struggling to meet the turbidity level requirements of the WELL W01 prerequisite, specifically with the hot water supply, and we're not sure how to best remediate the issue.  Should... Read more

Hello All-

  We have a K-12 school project that is using a R-60 flat roof assembly as an energy & costing benchmark (along with other energy efficiency measures but this is the relevant detail to our question).  The project mechanical engineer is not onboard with a number of our energy conservation measures and has been sharing... Read more

Greetings to the Green Commons!

Those of you who attended Greenbuild may remember that during one of the keynotes, Ali Zaidi - White House National Climate Advisor, announced that the White House was developing a definition for "Zero Emissions Buildings" (here’s a [LINK] to a related Washington Post article). The draft language for the... Read more

I have a request from an Architecture firm to do a Fitwel Core and Shell certification.  I don't do that type of thing - anybody out there interested in this type of work?

Respond here or just email at me annehicksharney@gmail.com.

Has anyone been involved with GBC Italia's Historic Building protocol? They are requesting pilot projects and I'm wondering if anyone has experience using or developing this framework. 

See attached checklist and form. Their website is pretty challenging to use. But so is USGBC...

Thanks!

Welcome to the quiz portion of Natural Ventilation: The Nine Biggest Obstacles and How Project Teams Are Beating Them

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the primary reasons to design a building for natural ventilation.
2. Understand how cost, comfort... Read more

Our guys have started talking about how the built enviroment can address infection transmission in public spaces - places like lobbies and waiting rooms, particularly in applications where people queue - theaters, airport gates, amusment parks, etc.  In the specific case of Covid-19, we know the microbe can be transmitted three ways:  fomite (... Read more

Welcome to the quiz portion of No More Red Lines: Undoing Our Legacy of Urban Segregation.

Learning Objectives
Upon completing this course, participants will be able to:

MSA has issued a safety advisory because they have received field reports that their green colored MSA V-Gard Protective Caps are cracking. Please share this with your safety staff if they do not already know. Let's keep everyone safe!

Hello, All!

Looking for some quick insight from the braintrust into how to best approach project goal-setting.

We’ve been taking a critical look at goal-setting practices to better understand what drives the gap between projects that meet ambitious high-performance targets and those that don’t. Recognizing that goal setting is a... Read more

We considering PV glazing for a project in SW Louisiana. Anyone have any successful PV glazing projects? Is this ready for primetime?