Welcome to the quiz portion of Deep Dive into the Integrative Process with Marcus Sheffer (recorded webinar)

Learning Objectives
Upon completing this course, participants will be able to:


In an effort to share expert knowledge on the topic of whole building LCA, we are continuing our expert guest webinar series, addressing the topic of steel on March 19th at 1PM EDT. Michael Gryniuk PE, with LeMessurier and SE 2050, will be joining us to share his strategies for reducing the embodied carbon of steel. This webinar is particularly... Read more

Hi All,

I am looking for a lifecycle analysis consultant to work on a feasibility study in New York. They should have capacity to analyze and compare various architectural, structural and mechanical components for environmental impacts, primarily GHG emissions. Any recommendations are greatly appreciated.

_Ilana

I posted this on the SCL as well, but am looking for anyone's experience and/or suggestions.

For any of you who are already tracking your Scope 1, 2 & 3 emissions: Do you do so through a program (like the Carbon Disclosure Project) or do you have an in house excel file or ???? I'm looking for a good template and am open to... Read more

Well done and rivhly deserved, brother.  That makes you a Fellow Squared.

Our building scientist has been using Insight 360 to model daylight and document it for LEED certifications.  However, it appears that Autodesk is no longer fully supporting the tool and may eventually stop all together.  (we have not been able to run simulations for weeks due to a change to how "cloud credits" work on their end that they... Read more

Hi folks,

It's here! Highlights, key takeaways, and pics from our packed few days together in Ashland, Mass. in the 2023 Summer Summit report.

From the intro:

Effectively meeting the challenge of the moment is what the world needs from us. Being grounded and energized by connections and sharing with our peers in a safe... Read more

Now that Ben has set up access restrictions, we have to decide what message to put on "paywall" screens. For example, on the Best Practices pages, the "Official language" tab is fully accessible, but if an anonymous user clicks on any of the other tabs they'll hit a login wall:

https://live-bituser.pantheonsite.io/best-practice/energy-... Read more

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Welcome to the quiz portion of LEED vs. Green Globes: A Definitive Analysis

Note: If you are taking this quiz as a member of LEEDuser, please take the quiz here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Highlight the most significant differences between LEED and Green... Read more

Hi SDL'ers, as promised I am sending information about how to support getting flame retardants out of foam insulation. I am attaching a draft letter to Foam Manufacturers, an intro to that letter giving some background and a list of From manufacturers.   Thanks, please contact if you have any questions.   Larry Strain, Siegel & Strain... Read more

CEUs are available for reading our entire plumbing guide. Click here to learn more and take the quiz.

Rainwater capture is increasingly important as shortages put pressure on our water systems.

BuildingGreen-Approved Rainwater Harvesting

We approve a wide range of rainwater catchment and storage systems and components, with... Read more

Sign up now to roll up your sleeves and have fun solving real problems! April 28 from 3-5pm ET

DESIGNING FOR DECONSTRUCTION

Building deconstruction, or disassembly, is a critical strategy for carbon reduction, minimizing waste & contributing to a circular economy, yet remains a serious challenge for many reasons.

Many... Read more

Hi All,

The SMEPL's Embodied Carbon committee has been hard at work developing a letter that calls for MEP equipment vendors to increase material transparency in their products.  As a way of contacting the most widely-used vendors first, we're asking each of you to enter your "Top 3" specified vendors for each of the products listed in... Read more

The Planning for Resilient Outcomes Working Group has had a few preliminary meetings and we would like to invite interested Green Gurus to join our group.  To give you an idea of what we are about, we have developed a purpose statement to guide our future work: 

The Planning for Resilient Outcomes working group will elevate the industry'... Read more

Hey All,

I wish I could brag about the tremendous success Integrus has had in conducting a robust LCA on every project.  Our goal is to use Tally to conduct a WBLCA on every project, but we are struggling with issues with staff time, project schedules, scarcity of expertise, and not having a streamlined process to produce reliable... Read more

Hello Sustainable Design Leaders!

Here are the details for an upcoming SDL Peer Network web call, this webinar will be a call to share research and resources around mass timber. Hope to see you there!
REGISTER HERE!

Embodied Carbon and Mass Timber – a shared learning conversation
March 31st, 2020
3pm - 4pm ET (... Read more