Hello Green Gurus!

Here are the details for the next Peer Networks Webinar (happening next week!): Don't forget to REGISTER HERE!

Define and Contract for Building Performance Simulation Services Using ASHRAE Standard 209
Thursday, February 13, 3pm EST (12pm PST)

ASHRAE Standard 209-2018 “Energy Simulation Aided Design... Read more

Ground- and water-source heat pumps move refrigerant or water through the ground or a body of water for use as a heat source (for indoor heating) or heat sink (for indoor cooling).

BuildingGreen-Approved Heat Pumps

BuildingGreen approves:

Welcome to the quiz portion of Existing Buildings Are Architecture’s Future!

Learning Objectives
Upon completing this course, participants will be able to:


The BuildingGreen Guide to Thermal Insulation provides detailed guidance on insulation products and practices, including recommendations on what insulation to use and what to avoid. It's a treasure trove of information for architects and designers, builders, and anyone who is actively considering the impact of insulation on the quality of your... Read more

Hi all,

Here's a good follow up to Maria's steel question on Monday.  We have a Midwest project that unfortunately (from a carbon perspective) is required to use a traditional, thick precast facade.  We’re working with the contractor and potential future (not yet bid out) fabricators to determine an appropriate % of pozzolanic material... Read more

Hello all,

Thank you so much for your work on the Contractor Commitment. In preparation for the Summit, we've pulled all of the sections together into one cohesive document. We would like to invite everyone in the SCL network to review and comment on this latest draft so that we can compile comments before Wednesday and make the most of... Read more

Hello All,

A group of us (three architects and a builder- sounds like there should be a joke here) were debating this and we  are stumped.

Application: Residential exterior trim.

50 year warrantied composite product of agricultural byproduct with PVC (EPD not published yet) vs 100 year (if primed on all sides and painted or... Read more

Embodied carbon in products and existing buildings. What does LCA tell us about renovation vs. new construction and material choices?

Guiding Questions: 

Columbia already offers access to free EV charging for our field employees. Of the few projects that have have opted in so far, we've had to custom design and intall EV charging setups. It's good that we're doing this, but it won't scale quickly enough and cost effectively.  I think a practical next step is working with trailer companies so... Read more

Hi all. Not to poach from your awesome firms, but FXCollaborative is hiring a Sustainable Design Specialist. Here is the job posting:

Sustainable Design Specialist - FXCollaborative, Brooklyn, NY, US

Please send any great candidates my way!

Thanks,

Dan

Hi everyone,

Thanks so much again to everyone who attended the Spring 2024 SCL Summit. The report is now available and is a public document that can be shared.

Please feel free to email me with any questions. Enjoy!

I was wondering if any design or contractor friend here can kindly share the carbon emission factor of excavation during construction. 

I found a paper that provides energy use rate per cubic meter and associated carbon emission in kgCO2 for different phase of construction such as excavation earth work, pouring and lifting concrete,... Read more

I'm pleased to announce that the AIA Board of Directors has unanimously adopted the A&D Materials Pledge as the AIA Materials Pledge!!!!! The support of so many of you was a key factor in making it so easy for the AIA Board to adopt The Pledge. The Materials Pledge now has 90 signatory firms, including many of yours. Thank you all.  Now,... Read more

MSA has issued a safety advisory because they have received field reports that their green colored MSA V-Gard Protective Caps are cracking. Please share this with your safety staff if they do not already know. Let's keep everyone safe!

Has anyone here had success in comparing life cycle impacts for different window system options? We have been trying to compare different options but have only been able to source one expired EPD for an actual window (frame + glazing). Is the typical approach to separately compare glass and framing options? Are we missing something or is there... Read more

Apologies if some of you are seeing this for the second time - on behalf of Frances Yang, Mike Gryniuk and the Carbon Leadership Forum, consider signing on in support of the SE 2050 Challenge for structural engineers. (Yes, there is an option to sign on as a non-structural engineer, in support of the program.)

http://... Read more