Forum topic
Hi all --
We have a national restaurant client who is looking to source furniture (both indoor and outdoor) made with a minimum of 40% salvaged/recycled material, and they're very interested in finding a vendor that's woman- and/or minority-owned or that would qualify as a "disadvantaged organization" (their terminology). They would... Read more
Forum topic
Sometimes referred to as “the dark side”, the construction industry isn’t actually so bad. We are mostly good people. And, we need good people.
Consigli is hiring a Sustainability Manager to work in Massachusetts, and we could use your help to fill the role. If you or someone you know is brimming with the sustainability force, please... Read more
Product Guide
Medium-density fiberboard (MDF), particleboard, and interior-grade plywood can emit formaldehyde, a known human carcinogen. Some materials come from non-sustainable sources.
BuildingGreen-Approved Panels
Products meet California Air Resources Board (CARB) ultra-low emitting formaldehyde (ULEF) or no-added-... Read more
Forum topic
Hi - we're working with the University of California Office of the President to put together low-carbon case studies. The two types we are looking for now include 1) a low-carbon TI (not a full building gut/renovation), and 2) any that involve the circular economy (in this case not just building reuse but product reuse) which could include... Read more
Forum topic
Hi All,
My understanding is that SCL reporting is only for refrigerant use, or recharging for headquarters. I've asked our MEP contractor for a list of our 21 units, refrigerant use, and what quantity of refrigerants were used to charge equipment during installation or service.
Is anyone tracking this for job sites?... Read more
Forum topic
All,
I'm sure a few of you attended our recent webinar on the LEED v4.1 LCA webinar. In case you missed it, the recording is posted. We were stunned by the amount of engagement from the audience; we allotted 30 minutes for questions and I think it went even longer. The webinar recording should be a great starting point for anyone... Read more
Forum topic
I was talking to Nadav recently about job posting opportunities through Building Green and/or through the Peer network. He shared this topic has been discussed in the past, and thought I should send a question out to the network. I am guessing many of you are looking for talent right now too? Wouldn't it be cool to know people of have been... Read more
Forum topic
We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more
Forum topic
We had these conversations grouped by size of firm.
Guiding Questions:
Knowledge Management By Firm Size
How to give people the info they need, when they need it?
Is the COTE Top Ten a good framework?
This seems extremely daunting in a large firm. How do we manage content that is produced and shared... Read more
Forum topic
Hi there colleagues!
Out of curiosity, do you plan on attending Greenbuild in person in San Diego in September? My staff asked me if we were going and my answer is partially contingent on the extent to which attending would mean getting to see some of our favorite people (read: all of you). Looking forward to taking the temperature of... Read more
Forum topic
If only a few of the Best Practices will have checklists, which will be included under the "Implementation Toolkit" tab, I'm thinking we can simplify them (compared with LEEDuser).
I've attached a screenshot of a LEEDuser checklist. But I don't think BITuser will need the four types of icons, and the legend will take up more space than... Read more
Quiz
Welcome to the quiz portion of Better Steel, Lower Impacts!
Learning Objectives
Upon completing this course, participants will be able to:
Understand the process of how steel is made.
Recount how the U.S. steel industry has been improving its environmental footprint, while improving product performance.
... Read more
Forum topic
Hey Peer Network! Curious, if we can crowd-source a solution here for the pervious pavers at our Omaha office (climate zone 5A). Apparently over the years we've tried to add different kinds of fill here (gravel) but it keeps... disappearing. Any recommendations with either a replacement product or fill item?
Forum topic
It is with the greatest pleasure that I announce to this esteemed group the recognition of our very own and much-loved leader Nadav Malin as an Honorary AIA member. AIA COTE had the honor to serve as Nadav's sponsor and we are pleased and delighted with this outcome (but not surprised of course.) For the record, "The AIA recognizes the notable... Read more
Forum topic
hi all! I'm almost at the finish line with this year's 2030 reporting...whew. I'm running into an issue that I wanted to throw out to this group, regarding the zero tool and national average baselines. Hoping some of y'all who manage your firm's 2030 data, or are just more familiar with CBECS and related data, have some insight / experience to... Read more