We are embarking on our first CLT projects (our at least we hope that they go that way). Would anyone with experience be willing to share some thoughts from the architect's perspective on things to consider, lessons learned, etc?

Welcome to the quiz portion of Toxic Chemicals in Buildings: How to Find and Avoid the Worst Offenders (recorded webcast).

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how key health hazards and opportunities for healthier choices vary by product category.
2. List... Read more

Now available on demand

As more and more architects, designers, contractors and owners demand transparency surrounding human health impacts in the built environment, manufacturers need short cuts and tools to meet the call of this demand.

This webinar is intended to educate manufacturers about the market demands for creating... Read more

Hello Sustainable Construction Leaders,

We’re happy to see the first round of registrations rolling in! If you haven’t yet, make sure to register here. And if you have any friends not currently in our Member Directory that you’d like to see at the Summit, encourage them to reach out to me (candace@buildinggreen.com). We’ll get them set... Read more

Happy Monday all!

i am looking for ROM on cost premium for LEEDv4 to go from Gold to Platinum and from Gold to Net Zero, anyone have any stats?  just looking for % premium.  Our projects show around 1% to get to Gold but not sure what it looks like above that.  Thank you!

Hello Green Gurus,

I am starting some research on municipal incentives offered to developers seeking to achieve sustainability targets and am wondering what you may have come across in your work, including but not limited to achieving Passive House. In my limited research, here are few I have come across to get us started:

If any of you did not get this via email directly from the AIA, here is the link to the AIA’s recent letter regarding HFCs…for firms to sign.

https://p2a.co/SlgBxFL

Looking for as many firms as possible to sign!

many thanks.

Mary Ann

Hello all, 

Wondering if anyone has experience with lead limits in electrical cable and wiring? 

LEED for Healthcare allows a limit of 300 ppm of lead in electrical wire and cabling - my search for compliant products has been all dead ends. (MRc PBT Source Reduction - lead, cadmium, and copper)

Acceptable regulations for... Read more

How interested are you in a Sustainable MEP Leaders Summit this summer? 

Please respond to this poll ASAP, as we need to gauge interest before we finalize any details.

When: Wed. July 26 at noon to Thurs. July 27 at 1:30. 
Where: At a conference facility near Boston
Cost: $1200, which includes lodging, meals, and... Read more

Our high performance consulting team is frustrated by project teams that regularly fall back on outdated rules of thumb in their system and equipment sizing. 

What challenges do you face in your work flow to limit oversizing and promote right-sizing?

By the way, Roger Chang, our literature search on the subject turned up an eleven... Read more

Nothing exciting like embodied carbon or EPDs... but I'm interested in some real talk on the actual performance of low-flow fixtures.  

We continue to encounter pushback on water-saving fixtures for concerns of ongoing performance. I'd love to have a dialog in this group because I find it hard to believe these challenges can't be... Read more

Is LEED Online mind-numbingly slow today for anyone else? Or is it just me? I may give up and try again tomorrow. Frustrating as I was hoping to submit a final review today. :(

Hello!

I'm curious what other firms like to use to run site-specific sun path and wind path analysises that is relatively intuitive to use and generates good graphics. We have used the climate consultant software for wind roses which is free and simple. We've also used sefaira but we're hoping to crowd source more resources. We purchased... Read more

We have a client who is asking us to design a roughly 10 ksf Wellness Center for PHIUS 2021 certification.  The program includes several high density assembly type spaces - roughly 300 person peak occupant load for the building.  The Criteria Calculator that the architect showed us puts the building peak cooling load at 4 BTUH/sf (3000 sf/ton... Read more

Welcome to the quiz portion of Essential Playbook to Managing LEED Construction.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Understand the transition from LEED BD+C or ID+C v4 to LEED v4.1, especially in regard to material-related credits.

2. Discern how to properly... Read more

Ventilation fans, kitchen range hoods, and laboratory fume hoods can use significant amounts of energy from both the fan motor and from venting heated/cooled air out of the building—air that then has to be replaced and conditioned by energy-intensive HVAC systems.

BuildingGreen-Approved Ventilation Fans

BuildingGreen ventilation... Read more

Hello everyone,

I'm Jen, the administrative assistant for Peer Networks here at BuildingGreen. I haven’t been too involved with the SAL network yet, but I’m looking forward to getting to know you better!

There has been some interest in convening the Sustainable Advising Leaders to determine the shared purpose that will motivate us... Read more

Our Peer Networks offer a safe haven to you and other leaders where you can support one another and work together toward sustainable solutions that are intent on moving projects and the industry forward in the best possible ways.... Read more