If your HVAC designers are addicted to the crack that is Trace 700, and knowing that Trane is giving up on that product in the coming year, what loads program are you weaning* them onto?

Asking for a friend:  Have any of you had success in using the Revit plug-in for loads?

*When told that they should use IESVE for loads, our HVAC... Read more

Hello friends, Posting this to help out a friend that you all know!

(please reply directly to Kira at her email below) Tx

Dear Gurus, 

I am curating/hosting a panel at CarbonPositive RESET:

DESIGNED FOR CLIMATE: A New Construction Showcase

North & South America: September 8, 2020 | 4:45-5:25pm (PST)

Interior doors may be a source of indoor emissions, and wood can be unsustainably sourced.

BuildingGreen-Approved Doors

BuildingGreen approves interior doors made from FSC-certified wood or reclaimed wood as well as composite doors with environmental features like:

Bobbie Socks

Thank you for your interest in BuildingGreen

You will hear back from our customer support team in the next 24-48 hours.

Continue to home page »

Are you or companies considering joining RE100? http://there100.org/going-100

"Companies joining RE100 make a global, public commitment to 100% renewable electricity.

To achieve this goal, they must match 100% of the electricity used across their global operations with electricity produced from renewable sources – biomass (... Read more

Welcome to the quiz portion of Is Wood Construction Green? A Look at the Issues.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Determine what distinguishes wood products sourced from Forest Stewardship Council-certified forests, and why these products improve the environmental impact of... Read more

Hi All,

I have a commercial restauranter in Colorado who is (reluctantly) considering induction cooking. Does anyone know of any good resources out there that can help make the case for this? That would include testimonials, research, videos, testimonials, or whatever else can help get a commercial kitchen comfortable to moving to... Read more

Hello all,

Does anybody know of a substitute for Ecotect's solar tool? I use it to very quickly test shade options and I love how I can easily test horizontal and vertical elements, tilting and rotating them. I can have a window with the façade on one side and the sun path with the shadow mask on the other side. It is easy to use and... Read more

Thank you for joining us for this webcast! Please complete the following survey to provide us with feedback and to record the information we need to report your CEUs.

By providing the information in this survey you will enable us to automatically report these CEUs to the appropriate organizations. Everyone attending and seeking CEUs must... Read more

Hi SCL,

I realize that there are already a couple of threads on this topic, but I didn't see anything from the past year.  We have been trying (unsuccessfully) to work with large rental companies to request jobsite trailers that are at a minimum energy efficient, and ideally solar/battery ready and/or built to passive house or similar... Read more

Older buildings—especially those from the 1950s, ’60s, and ’70s—need our help. Many leave something to be desired in terms of aesthetics and comfort. But the truth is that they are part of the urban and suburban fabric now, and they aren’t going anywhere. As tempting as it might seem to tear them all down and replace them with high-performance... Read more

Hi All,

Polling the group to see if anyone has experience with Simergy - an e+ based modeling tool?

The tool appears to have features and integration with a lot of e+ plugins that make it attractive - but i haven't heard of its widespread use.

Is anyone successfully using Simergy?

We are looking for someone early in their career to take over our green building certifications (mostly LEED).  They will also be helping our office build expertise in other certifications, keeping up with green building ordinances in our markets, and (hopefully) help me answer all those questions about energy codes. 

They do not need... Read more

I'm sure we'll learn more soon, but several people have asked on various platforms about how Betsy del Monte is doing (she lives in Asheville, NC, which was hard hit by Hurricane Helene). 

I had a brief text exchange with her on Saturday 28 September, and I feel sure that she would be OK with my sharing it with you all: 

We’re... Read more

I thought some folks here might be interested in a webinar we have coming up this Thursday 12/6 on the topic of best practices for occupant comfort surveys. Although this webinar is part of our Roast launch series, it will be tool agnostic, with information that will be applicable to any occupant survey regardless of tools used. 

To... Read more

Hi All,

USGBC MA is doing a study on the cost of net zero energy buildings in MA.  I’m wondering if you all have any data to share on plug loads in ZNE projects. I’m looking for single family res, 2-4 unit residential, +/- 60 unit residential, 10-12 story office, and k-12.  The engineers have presented initial results and their... Read more

Hey Gurus:

I have a client who is interested in reporting to their superiors on the status on energy codes in different states across the US. They are hoping to find some kind of summary that might show relative costs for HVAC systems under the various energy codes in effect across states. They are also interested in data that is... Read more

Hello friends. On a current school project, an abuse resistant wall covering has been proposed as an alternative to our typical MDF wainscot. The proposed product has been used successfully in healthcare, and switching to it will save the project almost $1million, which is no small amount when the project is over budget and 7-figure cost... Read more