Hey Gurus. Might anyone have experience, or thoughts, with regard to establishing an energy use baseline for a new advanced manufacturing facility we are working on for a regional technical community college? This type of academic facility is so relatively new, the program doesn't fall into the typical "College/University" building type from ... Read more

We are working on a large healthcare project in Minnesota.  We're setting sustainability goals a bit late - no certification, but targets with accountability.  I'm working to determine recycled steel content (for structural steel and rebar), and I've gotten a bit of push-back on recycled content based on being in the region of the Iron Range... Read more

Hi Folks, anyone in Boston (or willing to move) this could be a super cool opportunity for you! 

https://careers-bpda.icims.com/jobs/1557/senior-resilience-design-reviewer/job?mobile=false&width=805&height=500&bga=true&needsRedirect=false&jan1offset=-300&jun1offset=-240

Something we seem to be seeing a lot in our market recently are projects split into multiple packages - footing / foundation, C&S, and then later a TI package of CD's... mostly in an effort to speed up permitting and construction schedules. (Oftentimes with a contractor on board for a design / build approach). 

My question to the... Read more

Welcome to the quiz portion of Making Your Own Electricity: Onsite Photovoltaic Systems.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the difference between crystalline and thin-film photovoltaic technologies, and the uses of each.
2. Describe the ways in which PV... Read more

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Hi, a local sustainability not for profit whose board I'm on is considering a vinyl siding collaboration with the Vinyl Sustainability Council, started in 2016 by the Vinyl Institute. There would be some funding to create a program to help recycle siding and a chance to win a full new vinyl cladding. I don't think we should collaborate with... Read more

Hi all,

I wanted to reach out to fellow MEP energy modeling teams to assess everyone's experience with the new PCI calculation methodology in 2016. It was a substantial change in how we show savings on projects. Big changes can often come with un-intended consequences. I'm all for pushing to higher efficiency - just want to make sure we... Read more

Hi everyone, 

Thank you so much to the SDL members who attended the Summer 2023 Summit! We had an amazing time with you there. A big thanks as well to the attendees who shared 5-minute presentations during the summit.

Below are some of the slides for the presentations. Please note that we have permission from all of these... Read more

Greetings all, and welcome to all those who already introduced themselves!  My name is Steven Burke and I am a Sustainability Manager at Consigli Construction in Massachusetts.  We are East Coast only, but we have a few offices from DC up to Maine.  I’ve been helping Jenn and Nadav get this group up and running, and I’m relatively new to the... Read more

Hi everyone,

Just a reminder to please fill out the SDL 2024 Events Attendance Poll by the end of next Monday, December 18th. Thank you so much to those who have filled it out already! :) 

-Amanda

Sustainable Design Leaders in NYC

New York City has been discussing implementing PACE Financing for years but has not taken action. Over 48 municipalities in New York State have PACE financing for Commercial (including multi-family) properties, it's time NYC does as well. I recently learned from colleagues in the City that all of the... Read more

Hello Green Gurus.

I've been looking into EPDs lately and ran across a few companies with Product Envionmental Profiles (PEPs) which they say are also known as EPDs. Does anyone have any experience with PEPs or know if they actually are EPDs? They reference ISO standards 14040 and 14044 in the writing and ISO 14025 in the list of... Read more

Hello Green Gurus,

Here is the information for August's Peer Networks Webinar, A more Mindful Future: mindful MATERIALs plans for Digital Transformation through the Common Materials Framework. We hope you will join us!

Register HERE

A more Mindful Future: mindful MATERIALs plans for Digital Transformation through the Common... Read more

For more than 30 years, Alex Wilson has been the most trusted voice on energy efficiency and environmentally responsible design and construction. Since launching Environmental Building News (EBN) in 1992, he’s built a reputation, resources, and staff to provide the foundation for BuildingGreen, a consulting and information company... Read more

Hello - Other than hiring an acoustic consultant, I am wondering what in-house tools you are using internally at the design stage for modelling acoustic performance? 

Thanks, Mona

Hi All,

I wanted to pass on a few cool things we have going on at Built Environment Plus (formerly USGBC MA)  I really am conscious of not spamming you often and reserve posts for some of our most exciting happenings.

August 5, Building Tech Forum/MaterialsCAN: Getting to Zero with Embodied Carbon. Featuring 13 5-minute... Read more

Hello Green Gurus,

Here is the information for this month's Peer Networks Webinar, Making the Case for Equity with Data: a Free Tool for Project Teams. We hope you will join us!

Register HERE.

Making the Case for Equity with Data: a Free Tool for Project Teams
Tuesday, July 27th, 2021
1pm - 2pm ET (10am - 11am... Read more